imp0ster
Petty Officer 2nd Class
- Joined
- Apr 18, 2010
- Messages
- 189
I acquired it and of course the people forgot to mention a few small details. The left floor is rotten, there are no stingers as this is a rigid hull boat but 3 of the bulkheads are rotten and the left side of the transom needs attention. Gimbal ring is shot
All is not lost though. The interior is immaculate as if it came off the production line yesterday and the motor is a 355 from mid 2013 and I've rebuilt the entire top end with far better parts. I'm restoring and upgrading everything
I've read through the post below but he never finished positng.
http://forums.iboats.com/forum/boat-...-restore/page2
Anyway I'm going to pull the empty crap from the transom and pour Arjay into the cavity. I'll be using nidacore for the flooring and bulkheads with some roving on top and cheap mat on the bottom. My father repairs race boats for a living but he's 55 and can't do this non stop so I'm going this one alone.
Any advice would be greatly appreciated.
https://www.youtube.com/watch?v=UrOMU_W00JU
All is not lost though. The interior is immaculate as if it came off the production line yesterday and the motor is a 355 from mid 2013 and I've rebuilt the entire top end with far better parts. I'm restoring and upgrading everything
I've read through the post below but he never finished positng.
http://forums.iboats.com/forum/boat-...-restore/page2
Anyway I'm going to pull the empty crap from the transom and pour Arjay into the cavity. I'll be using nidacore for the flooring and bulkheads with some roving on top and cheap mat on the bottom. My father repairs race boats for a living but he's 55 and can't do this non stop so I'm going this one alone.
Any advice would be greatly appreciated.
https://www.youtube.com/watch?v=UrOMU_W00JU
Attachments
Last edited: