Any easy way to get out the bearing? Aq125a

[Mullin]

The AQ125A flywheel housing spindle bearing; the manual says to press out the shaft and bearing together. Is there another way?

Connecting Components AQ120B, AQ125A - 7742840 - Volvo Penta

 

[captmello]

Re: Any easy way to get out the bearing? Aq125a

Yes. Well...easy? I've never tried it. let us know.

http://forums.iboats.com/volvo-penta-i-o-inboard-gas-engines-outdrives/1986-aq131-275-drive-shaft-question-590395.html

 

[Mullin]

Re: Any easy way to get out the bearing? Aq125a

excellent, thank you.

So I recon you can just "tap tap tap" it all back in too right?

 

[captmello]

Re: Any easy way to get out the bearing? Aq125a

Pretty much, but you'll want to tap on the outside of the bearing race for reinstall since you will install the bearing on the shaft, then install.

Did you see this? might help. thanks to Don for posting all the helpful info.

You have the single bearing type. do the two seals as well.


http://forums.iboats.com/attachment.php?attachmentid=124018&d=1322930991

 

[Mullin]

Re: Any easy way to get out the bearing? Aq125a

Excellent stuff. Thank you.