I did the following to try and fix the over heating problem I was having
1) Rebuilt water pump
2) Replaced both head gaskets and water deflectors
3) Cleaned out all water passages
Idled it for about 15 minutes and then took some readings using a infrared thermometer
Results:
All 4 cylinders were reading about 126 degrees. Temp Gauge read 140 degrees
Does this sound ok??
Thanks
Jerry
1) Rebuilt water pump
2) Replaced both head gaskets and water deflectors
3) Cleaned out all water passages
Idled it for about 15 minutes and then took some readings using a infrared thermometer
Results:
All 4 cylinders were reading about 126 degrees. Temp Gauge read 140 degrees
Does this sound ok??
Thanks
Jerry