Newbee here. I would like some true and tested starting procedures. This Motor runs fine once started. I have Electronic Ingnition. Dumped old fuel. Got non oxinated 93 rated fuel/oil mix. Mixed to specs. Used bulb to prime. Bulb didn't go solid as in the past. I only filled 6 Gallon tank with 3 Gallons. Temp was near 70F. Used Battery charger to help get going. At this temperature with choke off it eventually fired. I have lever to set Choke along with Throtle. Ontop of Ignition box is a small button called Choke. Anyone else have this setup and what works for you to get things running well? Thanks in advance.