Boatfender426
Cadet
- Joined
- Aug 18, 2014
- Messages
- 8
[h=3]This is a repost from another forum in hopes I will get some info ASAP.[/h] I am wondering what would be the best layout using the the materials I have
The hull is incredibly thin and under 1/8" thick in places. ( I already cracked the hull while working inside.)
I have ground the inside and filled most of the low spots with small patches of 1708 biax and or peanut butter. The surface is still very uneven with many little dimples. I am currently grinding and attempting to smooth out the inside of the hull after doing some patch and peanut better fills.
What I have:
1) 12 yards x 51" of 1708 biaxial.
2) 25 yards x 51" of 7 1/2 oz. E-Glass woven
3) 13 gallons of Expoxy/Hardner
4) 25 yards x 12" of 7.5 E-Glass tape
5) 25 yards x 12" of 7.5 E-Glass tape
What would be the best layout sequence with what I have? 7.5 oz. E-Glass first and then 1708 or vice versa?
I am hoping to do a layer of woven plus a layer of biax over the complete inside of the hull and a layer of woven over the deck/sole.
The hull is incredibly thin and under 1/8" thick in places. ( I already cracked the hull while working inside.)
I have ground the inside and filled most of the low spots with small patches of 1708 biax and or peanut butter. The surface is still very uneven with many little dimples. I am currently grinding and attempting to smooth out the inside of the hull after doing some patch and peanut better fills.
What I have:
1) 12 yards x 51" of 1708 biaxial.
2) 25 yards x 51" of 7 1/2 oz. E-Glass woven
3) 13 gallons of Expoxy/Hardner
4) 25 yards x 12" of 7.5 E-Glass tape
5) 25 yards x 12" of 7.5 E-Glass tape
What would be the best layout sequence with what I have? 7.5 oz. E-Glass first and then 1708 or vice versa?
I am hoping to do a layer of woven plus a layer of biax over the complete inside of the hull and a layer of woven over the deck/sole.