I have a 25 Pull Start. Think it is 94.
I have no spark on either coil. Both coils and the powerpack are less than 1 year old.
I noted that the ground on the Powerpack had some major corrosion, I fixed that and again no spark
I have looked at the manual but I am not sure how everything works with the flywheel and generating power to the powerpack.
Can I get schooled on how everything works under the flywheel and can I be given direction as to whether or not I should try to tackle the flywheel being that I do not have the suggested tools.
On a side note, my motor would very often skip hard, very noticeable, while running wide open. Not consistently but say 10 tens on a 3-4 mile run.
Thank you in advance for your help, this is a great site. Glad I found it.
I have no spark on either coil. Both coils and the powerpack are less than 1 year old.
I noted that the ground on the Powerpack had some major corrosion, I fixed that and again no spark
I have looked at the manual but I am not sure how everything works with the flywheel and generating power to the powerpack.
Can I get schooled on how everything works under the flywheel and can I be given direction as to whether or not I should try to tackle the flywheel being that I do not have the suggested tools.
On a side note, my motor would very often skip hard, very noticeable, while running wide open. Not consistently but say 10 tens on a 3-4 mile run.
Thank you in advance for your help, this is a great site. Glad I found it.