1998 9.9 evinrude 4-stroke no spark

[Mn Warrior]

I have a 1998 9.9 h.p. evinrude 4-stroke with no spark and no key on alarm. I have replaced the coil and stator and I am only geting .03v with the key on and 1.0 volts cranking at the ignition coil.

 

[mikesea]

Re: 1998 9.9 evinrude 4-stroke no spark

check all kill switches and safty buttons

 

[Mn Warrior]

Re: 1998 9.9 evinrude 4-stroke no spark

Hello and thank you, the kill switch and wiring from the remote control to the engine tests ok, is there another switch I should be testing?

 

[Mn Warrior]

Re: 1998 9.9 evinrude 4-stroke no spark

Although there is no good test for the ignition module, when removed on the bottom side there is a transperent seal, looking through it I could see some corosion. I replaced it and got spark again. Anybody else ever replace one?