jamiechipper
Cadet
- Joined
- Apr 21, 2010
- Messages
- 17
I have a 1997 90 HP Evinrude. I am able to use the tilt/trim at the motor, but not at the throttle. Is there a fuse that I am missing?
I have taken apart the throttle to see if the switch is bad for the tilt/trim and it appears to be fine.
However, there does not appear to be power to the wires going to the switch. If I try to connect the red and blue wires nothing happens.
Thanks in advance.
I have taken apart the throttle to see if the switch is bad for the tilt/trim and it appears to be fine.
However, there does not appear to be power to the wires going to the switch. If I try to connect the red and blue wires nothing happens.
Thanks in advance.