hooterville
Seaman
- Joined
- Feb 18, 2007
- Messages
- 74
I have a 1995 9.9 Hp evinrude E10RELEOE that has problems with the engine cover latching. When i bought it it had the cover taped with electrical tape. The lower engine cover seems to be on straight and the cover fits on it good as well as the hook on the front of the cover is seating good. The latch doesn't hold the cover down and would probably blow off during transit to the lake. i have ordered the metal clip that goes in the part on the lower engine cover. This cover isn't like the larger hp engines that have a lever on the front and back.
the clip i am ordering is part #7 and inserts into part #6 . As stated above the cover latches down into these parts. Seems to be a poor way to secure the engine cover IMHO.
Here is the picture of the lower engine cover.
the clip i am ordering is part #7 and inserts into part #6 . As stated above the cover latches down into these parts. Seems to be a poor way to secure the engine cover IMHO.
Here is the picture of the lower engine cover.