Luvtofish123
Recruit
- Joined
- Jan 21, 2014
- Messages
- 3
The tilt/trim on my '94 150 Evinrude Ocean Pro stopped working. Does not work from Engine or Throttle. I have 12v to the relays. If I pull one relay and jump from the 12v to the tilt motor wire it goes up. If I put that realy back and pull the other relay and jump the 12v to the other motor wire it goes down. Does anyone have a wiring diagram for this,or ideas on a fix. It's obviously not the motor, I am doubting that both switches or both relays would fail at the same time.