mxzer29
Cadet
- Joined
- Jul 15, 2008
- Messages
- 27
Hello here is the scoop...
Motor shut down twice..think the oil pump quit-started missing....Did compression test 5 out of 6 cylinders all at 120 strong...middle cyl on right hand side 0...took head off, peice missing out of piston..looks like might be a peice of cylender sleeve where the port is...
weird thng is that the cylinder walls are not marked up??? there was debree on spaark plug..head has some marks....
Can I just do the one cylinder put a new piston and rings aand sleeve it if needed...
I fyou know of any old post to help me dissasemble the powerhead to get at [pistons...
On a limited budget!!
Tks
Motor shut down twice..think the oil pump quit-started missing....Did compression test 5 out of 6 cylinders all at 120 strong...middle cyl on right hand side 0...took head off, peice missing out of piston..looks like might be a peice of cylender sleeve where the port is...
weird thng is that the cylinder walls are not marked up??? there was debree on spaark plug..head has some marks....
Can I just do the one cylinder put a new piston and rings aand sleeve it if needed...
I fyou know of any old post to help me dissasemble the powerhead to get at [pistons...
On a limited budget!!
Tks