mmmckillip
Cadet
- Joined
- Aug 19, 2010
- Messages
- 24
The ignition switch on my 1989 Yamaha 130 went out so I bought a universal 3 prong ignition switch at west marine. The new switch has a B for Battery a I for Ignition and a S for Starter. The original ignition isnt marked so I don't know where to atach the wires on the new one. The original has five posts with 2 yellow wires connected to 1, 2 black wires connected to 1, 1 brown wire connected to 1,1 white wire connected to 1, and 1 red wire connected to 1. I know the red is the battery and the brown goes to the silinoid. Where do all the other wires go? Will this work with a three prong switch? Thanks for any input.
Matt
Matt