compression was 150x2 after 8 hours on the lake 105x2.
last time i took it out it ran all day just fine then it only ran on one cylinder.
i putted across the lake on 1 cylinder and went home 6 years ago.
I put new plugs in, 105x2 compression, disassembled the carbs and sprayed carb cleaner thru the jets.
new gas, it starts up runs for a few then dies at high idle 1.5to 2k rpm's.
when it was running i twisted the carb linkage and revved it up both cylinders were hitting and u could feel the torque.
then it bogged as i tried to rev it up some more and died, like it was out of gas.
so i took out both plugs to see if they were dry, nope both vary wet with gas.
starts right up, when u lower the lever for idle u can here it missing and it dies.
and help?
last time i took it out it ran all day just fine then it only ran on one cylinder.
i putted across the lake on 1 cylinder and went home 6 years ago.
I put new plugs in, 105x2 compression, disassembled the carbs and sprayed carb cleaner thru the jets.
new gas, it starts up runs for a few then dies at high idle 1.5to 2k rpm's.
when it was running i twisted the carb linkage and revved it up both cylinders were hitting and u could feel the torque.
then it bogged as i tried to rev it up some more and died, like it was out of gas.
so i took out both plugs to see if they were dry, nope both vary wet with gas.
starts right up, when u lower the lever for idle u can here it missing and it dies.
and help?