scrampbell
Petty Officer 2nd Class
- Joined
- Feb 25, 2009
- Messages
- 108
Starter engages, but no spark. Motor did something that didn't sound right at the exact moment that I turned the key off last (can't say for sure, but I think it originated from the key/ignition switch). Is there any chance a wiring problem in the console could be the culprit?
+ No spark at 1/2" gap in all three cylinders.
+ Known "iffy" wiring connections behind ignition switch at console.
Was there a safety lanyard on this motor? Would the starter still engage if there were a short in this jumper?
Thanks in advance.
+ No spark at 1/2" gap in all three cylinders.
+ Known "iffy" wiring connections behind ignition switch at console.
Was there a safety lanyard on this motor? Would the starter still engage if there were a short in this jumper?
Thanks in advance.