Hi to all, new forum member, but I have been reading the forums for awhile. I have a 1984 cobia 180 sunskiff center console. Except for 2's around the perimeter, the floor has been cut out and the flotation has been removed. Last week this started out as a simple steering cable R&R, but we found rot under the console. 2 hrs later the floor has been cut out, the hull gutted, and the stringers are coming out next. I cant believe the amount of damage that was hiding right under our feet. I am unsure how to get the remaining 2's of old floor material completely out and flush with the sides. I would assume that the same needs to be done with the stringers and the glass material. Thanks in advance