G'day everyone, we have a project boat going at the moment and are having a few problems with the power trim and tilt which was disconnected when we got it. The motor operates when we push the down button on the control box but nothing happens when we push either the up button or the trailer button. It has 3 wires coming from the control box which then go into a 2 pin plug. The wires appear to be blue, purple and green and the blue and green have been joined together before the plug.
My questions are:
1. Have the wires been joined correctly?
2. What tests can I do to trace the problem?
3. Does the position of the reverse lock knob have any affect on the operation?
Thanks in anticipation
Brett
My questions are:
1. Have the wires been joined correctly?
2. What tests can I do to trace the problem?
3. Does the position of the reverse lock knob have any affect on the operation?
Thanks in anticipation
Brett