Ronsubsailor
Cadet
- Joined
- Feb 24, 2012
- Messages
- 15
I've been working on this motor for several weeks now. I have ignition and fuel. Spark on all three cylinders yet the motor will not run. I have replaced most of the electronic parts. Rotor,trigger,coils,switchbox and rectifier.This moter has the CDM ignition system. I'm wondering if the timing is off so far that it will not run. I thought I had the wrong stator but checked all parts houses and they have the same number listed. The installation instruction say mount so wiring harness on the stator is starboard. Is mounting critical as it can be mounted in several positions? I have the repair manual but most of the tunning is done while the motor is running. Any suggestions will be appricated.