baltoelder0810
Cadet
- Joined
- Mar 27, 2014
- Messages
- 15
If anyone could help I would be so thankful!
I am restoring a boat with a 1973 Johnson 115hp starflite.
I took apart the remote control to re grease it and my ignition switch fell apart.
I bought two different sierra ignitions and neither will work and this is why.
My boat manual says the start position needs to hit the B S and A terminals.
Both and all the aftermarket ignitions I can find only hit the B and S terminal when starting.
The new ones use the A as an accessory terminal but my motor uses A to go the the rectifier and a few other things.
My motor will not start with the new ignitions.
What ignition do I need or can I make one of these aftermarket ones work?
Thank you so much!
I am restoring a boat with a 1973 Johnson 115hp starflite.
I took apart the remote control to re grease it and my ignition switch fell apart.
I bought two different sierra ignitions and neither will work and this is why.
My boat manual says the start position needs to hit the B S and A terminals.
Both and all the aftermarket ignitions I can find only hit the B and S terminal when starting.
The new ones use the A as an accessory terminal but my motor uses A to go the the rectifier and a few other things.
My motor will not start with the new ignitions.
What ignition do I need or can I make one of these aftermarket ones work?
Thank you so much!