smevil
Petty Officer 2nd Class
- Joined
- Apr 5, 2011
- Messages
- 123
I got the 1970 evinrude 40 horse I have cleaned and rebuilt the carb with new needle valve, gaskets etc. on ocassion it seems to stick and when I prime from the tank it pushes fuel out of the 3/8 hole on top of the carb that faces fwd. When I take it apart again and put it back together it work fine, then as I walk by to test a day or so later hit the primer bulb and out the top hole again. Bet I have had it apart 8 times. Any ideas?