BrianOGrady
Seaman Apprentice
- Joined
- Oct 6, 2015
- Messages
- 31
I recently bought an 1980 Carolina Skiff J12 and in the deal got a non running/or has not ran in several years 1962 Evinrude 18hp Fastwin motor. This is a winter project and I am starting to get into the motor. A few questions to get started.
Last night I drained the lower unit and had a just a slight bit of water, very little.
What is the best lubricant to fill the lower unit back up with?
There was no fuel line with the motor.
Is there a universal part number for the connector? I did get a new fuel tank with the deal, but need hose and a bulb.
Also what should be my next plan of attack after I get the fuel hooked up and the lower unit filled?
thanks for any help, I have been doing searching for the last week and understand I should get a new impeller.
Does any have Napa reference numbers for these parts?
Brian
Last night I drained the lower unit and had a just a slight bit of water, very little.
What is the best lubricant to fill the lower unit back up with?
There was no fuel line with the motor.
Is there a universal part number for the connector? I did get a new fuel tank with the deal, but need hose and a bulb.
Also what should be my next plan of attack after I get the fuel hooked up and the lower unit filled?
thanks for any help, I have been doing searching for the last week and understand I should get a new impeller.
Does any have Napa reference numbers for these parts?
Brian
Attachments
Last edited: