rjswenson
Cadet
- Joined
- Jul 19, 2013
- Messages
- 10
1960 Evinrude Lark Model 35520
I removed the flywheel to change the ignition parts and decided to check the flywheel magnets using the screw driver method. I have magnets on both sides of the flywheel and I expected that both magnets would show some magnetized condition. One side did not - is this normal?
I removed the flywheel to change the ignition parts and decided to check the flywheel magnets using the screw driver method. I have magnets on both sides of the flywheel and I expected that both magnets would show some magnetized condition. One side did not - is this normal?