armedserenity
Recruit
- Joined
- Apr 2, 2012
- Messages
- 2
Motor ran hot and was not pushing water out the tube. Not sure if it was the thermostat or the waterpump, so I pulled the stat out and ran it for 30 seconds and it was ejecting water. Removed the lower unit and checked the impeller on the pump. looked brand new. Used an air compressor and blew out the line and reassembled the whole motor, including a new stat. Ran great on the muffs in the driveway, never got above 52 degrees C.
Took it to the lake and it stopped ejecting water about a mile from the ramp and shut down. Let it cool and got it back on the trailer. Never was putting out water again. Any ideas what else thie problem could be? Thanks
Took it to the lake and it stopped ejecting water about a mile from the ramp and shut down. Let it cool and got it back on the trailer. Never was putting out water again. Any ideas what else thie problem could be? Thanks