Search results

  1. M

    Reed Valve ?s

    I have a 1969 Mercury 500, #2629264. The fuel systems completely rebuilt 10 years ago and ran non ethanol gas with Mercury 2 stroke oil at 50-1. I haven't really used the boat for a couple of years now and am wondering about rough ride and running issues. The plugs from the lower carb #3 and...
  2. M

    Carb Problem? 2 out of 4 Spark plugs Have carbon buildup?

    Hey all I have a 1969 Mercury 500 with Thunderbolt ignition, Serial # 2929264. I rebuilt the carbs and fuel pump around 8 years ago. Last time I used the boat I noticed the engine running ruff and not starting after a long run. So I pulled the plugs and noticed that the plugs for the 1&2...
  3. M

    Water pump housing removal for 1969 Merc 500...

    I have a 1969 Mercury 500, serial #2629264. I can't get the lower housing of the water pump out of the lower unit. What is the trick getting it out? I have done it before but can't remember how to remove it. The vent plug has been removed.
  4. M

    Fuel hose in power head compartment ? for 1969 mercury 500

    I have a 1969 Mercury 500, serial # 2629264. The question I have is in reference to the fuel lines. All that I have read is that the fuel lines should be 3\8 I.D.. So I have 3/8 outside of the power head but inside of the head compartment I have 1/4 in.. A previous owner put adaptors in that...
  5. M

    1969 Mercury 500 Internal Wire Harness Help

    Hey All I have a 1969 Mercury 500, serial #2629264. My internal wiring harness has disintegrated. I would like to purchase a new one or find a used one. Can someone please give me the pert number and or a source where I can find a replacement? I have looked in several spots and I can't seem...
  6. M

    Distributor and rotor part # for a Mercury 500

    Hey all I am looking for the part #'s for a distributor and rotor for a Mercury #2629264. 1969 Mercury 500
  7. M

    mounting a ladder to aluminum boat????

    I need help with mounting a ladder to a 1964 Mirror Craft Ski n Troll. It is a aluminum hull with no leaks! I need to drill holes into the hull to mount the ladder. The question is how do I seal the holes properly and mount the ladder? I think I am being a little gun shy... I am going to...
  8. M

    1969 Mercury Prop HELP!

    Hey all I have a 1969 Mercury 500 #2629264. On a 14' 1964 Mirror Craft Ski and Troll. The prop is so worn I cant read the numbers on it. I would like to get a new one. I called Mercury and they said that they dont have anything new because the prop has 11 splines. I have some numbers from...
  9. M

    How much does a Mer 500 Engine weigh????

    I just bought a new car and need to know how much I am towing. I have a 1969 Mercury 500 and would like to know the weight of the engine. Anyone know??!!! Thanks much
  10. M

    Where to get a Carb body. Need a new or used one???

    I have a 1969 mercury 500 #2629264. I have a stripped out I think its the idle jet. It is on the bottom of the bowl. Anyway I need to either fix it some way or replace the body. Where can I get one? Any input is great! I have to start somewhere.
  11. M

    Mercury switch location?? HELP_!

    I have a 1969Merc 500 #2629264. I have taken and rebuilt the fuel system and am still having trouble with the low idle and slow speeds after a long hard run. I noticed that someone else had similar issues and replace the merury switch. I dont think my motor has one but thought I would ask the...
  12. M

    How long do Distributor Caps and Rotors Last????!

    I have a 1969 Merc 500 #2629264. I have noticed the a Rotor and Cap are very expensive to replace in these motors. How long do they last? Hours whys that is. I have not replace mine but I think I need to, owned for less than a year and not sure of maintenance done by previous owner. The...
  13. M

    Main Jet Issue 1969 Mercury 500?????

    I have a 1969 mercury 50 #2629264. I rebuilt the carb over the winter. Rebuilt the fuel pump and replaced all hoses. But I forgot to clean the tank! So I Took out the boat and at first it purred beautifully. Than I decided to open her up and did a nice 5 10 minute run at WOT. Made a nice...
  14. M

    ? about using a inline fuel filter on 1969 500

    I have a 1969 merc 500. I put a inline fuel filter before the primer bulb. on of the clamps is leaking due to a very small bend in the hose clamp. I have tried to tighten it pretty good but dont want to break it. My question is two parts; 1) should I do this? I am doing it because I want...
  15. M

    Starter is Dead!! How do I check Solenoid???

    Hey fellas, I got a 1969 mercury 500, SN# 2629264. So I went to fine tune some carb work today and I turn the key and nothing! I push the electric choke button and that works as do the lights. I check and clean all of the connections and make sure all is secure. Than I check the battery...
  16. M

    Wont idle after a hard run 500hp 1969

    I have an issue at idle after the motor has been run at full throttle. I went to slow down and the engine slowed way down and you could hear the trans slip out of forward.(new) She runs great until I do this. I had the same issue before I rebuilt the carb for leaking and It would not run...
  17. M

    New Pulleys on Drum Type Steering??

    Hello all. I have a question about the drum type steering system. I need to replace the pulleys, mine are starting to disinigrate. I have a 1968 Mirror Craft 14' Ski and Troll. I have read the posts as to How To Replace the Cables. But there is nothing about the pulleys. My question is...
  18. M

    New Water Pump Housing ??

    I bought both upper and lower water pump housing plus impeller and such to rebuild the pump. I went to Krowley Marine and pulled up the corect parts for year and serial # of motor. When I got it the upper housing is different. There is no seal around the drive shaft. WTF? Is it a revised...
  19. M

    Where can I get a new cap and Rotor for a 1969 Mercury 500??

    I have a 1969 Mercury 500. #2629264. Where can I get a new rotor and cap??
  20. M

    Cant numbers off prop. Need help

    Hey everyone I am new to the boat world. I am currently rebuilding the pump and the LU. The engine is a 1969 mercury 500 serial# 2629264. The current props I have a 2 blade, I think 10-10.5 in props. I would like to get a new one but dont know how to get the right one. The number on the hub...
Top