Can I use Evinrude brand 2 stroke oil to mix 100:1 mix for a 8 hp Yamaha? The Evirude oil bottle does not give the amounts for a 100:1 mix on the bottle. Is this brand insufficiant to mix a 100:1 ratio?
Thanks much, Rifflerunner17
1991 Evinrude 15 hp, hit a rock in the river and broke the skeg off just below the gear housing. Can I have a new piece of the proper metal welded on to form a new skeg? What type of metal is it? What type of welding should be used? Will welding damage anything in the lower gear housing? I had a...
I need a throttle control schematic for a 92 evinrude 15 hp. I need to order a part and don't have a part number or know the name of the part. The place I'm ordering from has all the parts but no pictures of them. I need a schematic that shows pictures and names the parts so I can order the...
Does anyone have a Mercury, Quicksilver, Tacoma or Michigan Wheel prop part number for a older Mercury 110 9.8 horse power serial number range 4687XXX. Don't know the year of motor, but think it's in the 1970's.
Thanks very much, Rifflerunner
When looking for a new prop for my 15 I found that there was two types of blade selection. One looks like a standard blade and the other has much wider blades....looks like a 3 leaf clover. What would be the benifits or drawback of the wider blade. Hope someone knows.
Thanks...
I'm thinking of buying an 89 Suzuki 140 hp with a jet that was completely rebuilt 6 years ago. What would be the proper range for pounds of compression in the cylinders. Thanks,Mark
My new gasket appears to be "stickey", does it require gasket sealer? If so, what type, brand do you suggest when replacing the powerhead.
Thanks, Riffleunner
Got a 2004 merc 2 stroke with no instruction manual as to how to properly use priming and fast idle for cold starts. Do you pull primer and leave it untill it starts? Or pull it and push back in and try to start? How come no choke on this newer motor? What would be the best cold starting in cold...
Sound and feels like it looses spark or fuel for a second or so and then recovers. It does this of and on at a low trolling speed, runs great at high RPM. I just got this motor and when I did I changed plugs from BPZ8HS to BP8HS. Could that cause it, I'm puzzeled. Anybody got any good info?
Got some new NGK plugs and need the gap for them. What do you think of NGK? If another is recomended, do you know plug maker, number and gap?
Thanks much!!!
!992 Evinrude 15 horse ran fine, then started stalling at high and low speeds. I found that it would keep running if I pulled choke out about two thirds. I rebuilt carb and fuel pump (have done many) checked all fuel lines and gas tank.....still the problem exists and has not changed. Do I have...
I have a 92 evinrude 15 horse that ran great and all of a sudden started stalling at low speeds and then wouldn't start or run without the choke pulled two thirds out. I rebuilt the carb nd fuel pump (have done many) and the problem still exists, no change at all. It will idle fine and run at...
