So I have a 16' tracker deep v with a 1989 25 hp Johnson outboard. The motor runs and idles fine. I was running WOT across a lake last weekend (lake was glass and no wind) with my buddy doing 22 mph according to GPS (boat was heavily loaded with fishing gear). I decided to let my buddy drive...
Hi, thanks for reading my post. So I have a 1989 Johnson 25 hp outboard that runs great in stock form. I recently changed out the carb and intake manifold from that of a 30/35 hp motor of a similar year. I've read multiple posts about others doing this with great success so I wanted to try it...
So I removed the center nut and put a harmonic balancer puller on using 3 1/4-20 bolts as required. Started cranking on the center bolt and I can't get the flywheel to budge. I even tried using an impact and actually busted one of the 1/4-20 bolts in the threaded holes. Assuming I can drill it...
I have a 16ft Deep V with a 25 HP Johnson (Model # TJ25ELCEB). The motor was running great earlier this year. I typically have myself and maybe one other person in the boat with me and the boat will do about 20 mph. A week ago I took one extra person with us so 3 grown men in the boat. The boat...
So I bought a used intake manifold for a project I am working on. I need part # 0396790, and found a used one online at a boat dealer. The dealer advertised the part as being # 0396790 which is what I needed. I received the part in the mail yesterday and I come to find out that the #0396790 was...
Not sure if this is where I should be posting but I am looking for help finding the correct part #'s for a 35 hp carburetor that will bolt right in on my motor. I have an 89 Johnson outboard model # TJ25ELCEB and the current carb has a stamp on the top that says IN432700. Now if you haven't...
So, my motor runs great, and I don't usually have issues starting it (other than having to mess with the primer solenoid switching between manual and automatic), but after reading a lot of posts about the primer solenoid I'm beginning to wonder if my starter itself is not operating correctly...
Just looking for a little help here. This is a new to me motor purchased a week ago on a 16 ft Tracker Deep V with side console. Motor runs great at almost all speeds and spits out plenty of water from the side which tells me it's cooling properly. However, after running the motor for awhile, if...
