Hello,
Working on a 1996 200EFI merc and its giving the intermitent alarm ,looking for suggestions because I have tried about everything I can think of.
Here is what we have checked:
1) Oil cap on resivoir,tested and its good
2) Had new spare alarm module so we slapped that on
3)Removed oil...
Hello,
Got a 3.0 Mercruiser that we are trying to get running and here is what we have done.
Checked spark- good
checked timing-good
checked compression- cylinders seemed dry so we squirted oil in each cylinder and compression is at roughly 100 on each cylinder
Did a blowdown test- seemed...
Just put on a 2002 F115 yammi and it ran great the first time we had it out.The second time this past weekend the audible came on and I lifted the hood and saw oil on the front of the intake plastic,come to find out the oil pressure sensor was loose. I tightened the oil pressure sensor and the...
Hello,
I have a 25hp merc four stroke(2006) that I changed out a full waterpump kit on and also checked the thermostat, it still will not shoot water out the tatel tale. Ive done tons of water pumps so i am sure thats on correctly (had it off 3 times) and also removed all screens to make sure...
I am going to switch motors out on a boat and it has a late 80's 110HP Evinrude and I want to put on a 2003 F115 Yamaha.Can anyone tell me what all needs to be changed in the process. I am mainly wondering about the wiring and controls/tach.
Thanks in advance for the help
I am building a project where I need a voltage regulator/rectifier that can handle at least 45 volts AC , need the volt regulator to bring voltage down to 12 volts and the rectifier to charge DC. Any ideas for a volt regulator/rectifier would be great.
Thanks in advance
Motor runs great at Idle but when I get it around 1/2 to 3/4 throttle it pops and carries on and I noticed that the head gasket is leaking when it pops. Why would air pressure be coming popping out of the head gasket since this motor just has a water cover not a removeable head.??
My...
The motor works great at low speeds, when you get into the throttle a little farther it seems like the motor makes a clunking noise alomost like you hit a rock or log with the lower unit and then it comes out of it. I took the lower unit apart and it looks fine, any other suggestions are...
I am having some ignition problems with this motor, here is what Ive done, replaced the powerpack with a new OEM pack. Stator has good voltage and passes resistance tests,
The timer base is what i am questioning, the resistance on the timer base from the black/white wire to the white wire...
I am working on a merc 50 hp , I believe it is a mid to early 80's 50 HP ,4 cylinder, it keeps blowing the powerpack on the top two cylinders, I was wondering if this could be the voltage regulator/stator/trigger or combination of all three, it has blown three packs so far and Im looking for the...
where can you buy a 4 stroke powwerhead that is remanufactured or rebuilt? How much money are they, also what is a 115 merc worth with a blown motor(hole in the block).
