I know this is a very broad question, but where is the best place to look for and purchase a bimini top? Here?
And what about mounting? Inside/outside of windshield? On the windshield frame? I know mounting has a big bearing on the frame height.
What about length? I am seeing 4', 5, even 6'...
This is not as much of a question but more of a rant.
I got the Navionics HotMaps chip for my Lowrance. It is a great chip and really has lots of detail. I though $150 was a bit much, but I know what goes into making one of these things and it was worth it to get the level of detail it gives...
Hey all.
My little boat is in excellent shape for it's age, but the starboard side lounge seat has seen better days.
I would like to replace it with a more modern single pedestal seat. Preferably something that is height adjustable so I can sit high and look over the windshield, or down low...
OK, so I just ordered a new balancer for my 1987 3.0l motor, the old one came apart.
I am a long time car and motorcycle guy and I have a pretty good clue about boats as well.
Thing is, the balancer on this motor is pressed on, with no bolt. I can't see if the tapered hole in the crank snout...
Hey all. I have an beautiful new Elite-5 in my boat.
What are my options as to Micro-SD cards and maps/charts?
I stay in one area mainly and really do not see the need for a Navionics HotMaps card for the whole Northeast.
One issue I have with the pre-loaded maps is that my river area does...
Hey all.
I have an '87 Baja Islander180 with a 3.0l Merc I/O. While under power at cruising speed if I let go of the wheel the boat will pull to the left rather hard. I HAVE to hold the wheel the whole time or this will happen.
Also, the boat lists to the left, also while under power.
I have...
Hey all.
I am pretty forum and web savvy and did search for this info but came up a bit dry.
I have a new Teleflex tach I installed in my 1971 16' Starcraft with a 1971 50hp Johnson.
I know this is an alternator motor and have everything but the sensor wire hooked up.
From what I have read...