Replies |
Thread Title |
Forum Title |
| 1 |
5.0 GXI water pump hex bolt removal |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 13 |
ordering new wheels and tires....bolt patterns? |
Trailers and Towing |
| 2 |
will a earlier merc 65 hp lower unit bolt up to later 65 hp redband? |
Mercury & Mariner Outboards |
| 5 |
Stripped bolt |
Johnson & Evinrude Outboards |
| 5 |
Lost my Shift Linkage Bolt so I made a new one |
Johnson & Evinrude Outboards |
| 21 |
4.3lx Broken starter bolt hole |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
AQAD40b removing crank nut- what is best way to lock engine when undoing crarnk bolt? |
Diesel Marine Engines |
| 6 |
Head bolt keeps breaking |
Johnson & Evinrude Outboards |
| 4 |
Mercruiser 140 1986, what does this bolt/screw go to? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 15 |
Broken starter bolt removal gone wrong? Need advice... |
Mercruiser I/O & Inboard Engines & Outdrives |
| 8 |
Removed bolt on outdrive and now cannot get it back on |
OMC I/O & Inboard Engines & Outdrives |
| 1 |
1988 88 hp 2 part question Head bolt torque ? and water deflector? |
Johnson & Evinrude Outboards |
| 6 |
1996 4.3 gen+ broke intake bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Outboard mounting bolt pattern? |
Non-Repair Outboard Discussions |
| 3 |
Mercruiser 3.0 litre stripped head bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
BF100 Head Bolt Size |
Honda & Tohatsu/Nissan Outboards |
| 3 |
Broken starter bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Broken starter bolt |
Trailers and Towing |
| 1 |
Mercruiser 3.0 I/0 bolt missing? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 13 |
1971 chrysler 70 hp head bolt torque specs |
Force & Chrysler Outboards |
| 3 |
Sportjet pump bolt? |
PWC (Jetskis, Waverunners, etc.) |
| 6 |
1988 alpha 1 outdrive pivot bolt removal tool |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
chrysler 318 inboard, manifolds, bolt torque |
Other Brands of I/O & Inboard Engines & Outdrives |
| 0 |
1978 25hp Evinrude 2 stroke, Head Bolt Torque Specs/ft lbs |
Johnson & Evinrude Outboards |
| 5 |
nut and bolt tighting sequence on 1966 Johnson 5hp model LD-11C powerhead |
Johnson & Evinrude Outboards |
| 7 |
Stupid Bolt/Nut question Mercruiser 4.3lx |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Stupid Bolt/Nut question Mercruiser 4.3lx |
Mercury & Mariner Outboards |
| 9 |
Broken Bolt on trim cylinder - how to replace? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
1974 Mercuy 1150 Upper Swivel Mount Bolt Removal? |
Mercury & Mariner Outboards |
| 7 |
Need a bolt to hold the trim tab on a '86 40hp 'rude |
Johnson & Evinrude Outboards |
| 4 |
1990 volvo 501 with DP-A Drive, what other drives bolt up? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 3 |
Frozen Bolt Problem and Repair |
Johnson & Evinrude Outboards |
| 10 |
1989 evinrude 60hp vro head cylinder torque and bolt adjustment order |
Johnson & Evinrude Outboards |
| 1 |
1989 Evinrude CRANKCASE 14 Bolt Sequence for complete rebuild. |
Johnson & Evinrude Outboards |
| 2 |
Match Merc transom bolt pattern w/ Johnson |
Non-Repair Outboard Discussions |
| 3 |
New set up timing - vp 570 (2 bolt main 5.7 rollers and hydraulic lifters) |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 4 |
stripped threads on head bolt model 470 mercruiser |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
1979 mercury/mariner 80hp bolt pattern |
Mercury & Mariner Outboards |
| 2 |
Stern Bracket Replacement 1988 Johnson 9.9 J10RCCD - - Help with bolt removal |
Johnson & Evinrude Outboards |
| 25 |
T Bolt IV to MSD Ignition |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
need 1967 6hp head bolt specs |
Johnson & Evinrude Outboards |
| 7 |
Head Bolt Shaft Grease Ideas |
Non-Repair Outboard Discussions |
| 1 |
5.0 l 0or 4.3l gm engine bolt on to Volvo out drive |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 3 |
Merc T-Bolt 500/50 |
Mercury & Mariner Outboards |
| 4 |
tap a stuck bolt? |
Johnson & Evinrude Outboards |
| 4 |
Need Help! Front engine component bolt-ons 1990 Mercruiser v8 |
Mercruiser I/O & Inboard Engines & Outdrives |
| 25 |
5.0 mercruiser chevy starter bolt holes stripped, helicoil or not |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
hot vs. cold to free up a frozen bolt |
Johnson & Evinrude Outboards |
| 5 |
Thunder Bolt IV Upgrade? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Mercruiser 3.0 swap question (crankshaft bolt patterns) |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
OMC Trim Bolt Thread Size ? |
Johnson & Evinrude Outboards |
| 3 |
broken shift rod bolt head |
Johnson & Evinrude Outboards |
| 9 |
'59 Lark Head Bolt Issue - Helicoil vs. JB Weld vs ?? |
Johnson & Evinrude Outboards |
| 2 |
cant find bolt part # |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 19 |
Head bolt size? |
Johnson & Evinrude Outboards |
| 5 |
Riser bolt question. |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 8 |
Stripped Cylinder Head Bolt Hole, Helicoil or Larger Bolt |
Johnson & Evinrude Outboards |
| 5 |
tapping tilt slide bolt broken off in Evinrude 20 |
Johnson & Evinrude Outboards |
| 3 |
water exiting between lower unit and mid-section where they bolt up. |
Johnson & Evinrude Outboards |
| 4 |
Cylinder Head Bolt question |
Johnson & Evinrude Outboards |
| 17 |
GEN II Lower Unit Bolt/Stud ? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
93 johnson tj25eletc head bolt torque specs? |
Johnson & Evinrude Outboards |
| 28 |
Lower unit oil bolt siezed |
Non-Repair Outboard Discussions |
| 28 |
Lower unit oil bolt siezed |
Boat Topics and Questions (not engine topics) |
| 6 |
HELP V4 bolt head on shift rod broken off |
Johnson & Evinrude Outboards |
| 2 |
1975-john-25-hp water leak from rear recoil bolt hole |
Johnson & Evinrude Outboards |
| 0 |
shield bolt |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 12 |
snapped main lower unit bolt at the threads |
Johnson & Evinrude Outboards |
| 12 |
Allan key bolt 1998 75 Force |
Force & Chrysler Outboards |
| 8 |
470 Riser Bolt size? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Mercury thunder bolt overheating |
Mercury & Mariner Outboards |
| 2 |
Exhaust cover bolt 1998 75 Force |
Force & Chrysler Outboards |
| 8 |
HItch Ball with a bolt instead of a stud |
Trailers and Towing |
| 1 |
Rebuilding Bow Winch U-Bolt |
Pontoons |
| 9 |
Boat overheats and will not eguage reverse and bolt rounded off to lower gear |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
1966 40hp Johnson - Soft Torque on Head Bolt? |
Johnson & Evinrude Outboards |
| 1 |
233 hp mercruiser head bolt torque- |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Tilt Bolt Adjustment |
Johnson & Evinrude Outboards |
| 3 |
missing bolt |
Johnson & Evinrude Outboards |
| 5 |
Tilt bolt |
Johnson & Evinrude Outboards |
| 9 |
johnson 6hp tilt bolt and bushings ? |
Johnson & Evinrude Outboards |
| 3 |
40HP Lower (trim bracket) broken bolt |
Mercury & Mariner Outboards |
| 2 |
Name this style of bolt |
Trailers and Towing |
| 2 |
Removing epoxy from bolt thread |
Boat Restoration, Building, and Hull Repair |
| 5 |
Odd 4 lug bolt pattern on old Lone Star King Commander trailer |
Trailers and Towing |
| 3 |
6R78B powerhead bolt fell out |
Johnson & Evinrude Outboards |
| 2 |
Missing Bolt! |
Johnson & Evinrude Outboards |
| 3 |
bolt a 170 into a 120 hole? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
How To Replace Shift Linkage Bolt?????? (Fast Reply Needed) |
Johnson & Evinrude Outboards |
| 13 |
Loose ladder screw/bolt |
Boat Topics and Questions (not engine topics) |
| 1 |
will a 400 sbc bolt to a alpha one and alpha 2? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Broken Thermostat Bolt |
Yamaha & Suzuki Outboards |
| 13 |
Philips head bolt next to drain plug question |
Johnson & Evinrude Outboards |
| 1 |
1986 omc cobra outdrive pivot bolt\pin part# needed |
OMC I/O & Inboard Engines & Outdrives |
| 1 |
Ground bolt on starter size help |
Mercury & Mariner Outboards |
| 3 |
25 hp mariner 1984 ish. impeller change how do i get to the shift shaft bolt or clip |
Mercury & Mariner Outboards |
| 6 |
Bowrider to Cuddy with removable bolt on front cover? |
Boat Restoration, Building, and Hull Repair |
| 3 |
Ball Chain bolt ends?? |
OMC I/O & Inboard Engines & Outdrives |
| 11 |
1996 Four Winns Volvo-Penta 4.3 GL PNCS Starter replaced, but stripped back bolt :( |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 1 |
Ball Chain bolt ends?? |
Non-Repair I/O and Inboards |
| 1 |
Ball Chain bolt ends?? |
Non-Repair Outboard Discussions |
| 9 |
How tight should i bolt on the motor? |
Non-Repair Outboard Discussions |
| 5 |
Broken starter bolt in Mercruiser 3.0L ALpha one Engine block |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Allen Bolt Size? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
1977 Merc 500 flywheel bolt size |
Mercury & Mariner Outboards |
| 2 |
AQ125A/270 Intermediate housing to block bolt torque?? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 1 |
AQ125A drive plate bolt torque? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 8 |
Re-lag Bolt or Through Bolt |
Boat Topics and Questions (not engine topics) |
| 3 |
stripped out threads on alpha 1 cap bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 12 |
1999 yamaha tilt unit bolt removal |
Yamaha & Suzuki Outboards |
| 8 |
Help me identify this bolt! |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Head Bolt Torque '1980 235 evinrude HELP ! |
Johnson & Evinrude Outboards |
| 2 |
Thunder Bolt IV ignition timing question |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
1988 Force 125 stripped head bolt |
Force & Chrysler Outboards |
| 3 |
Aluminum bolt with anode |
Mercruiser I/O & Inboard Engines & Outdrives |
| 7 |
Stripped bolt hole repair help! |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
Broken Bolt on Exhaust Collector |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
Head bolt part # |
Non-Repair I/O and Inboards |
| 12 |
Shift Linkage Bolt Stuck |
Johnson & Evinrude Outboards |
| 4 |
Does anybody know size of bolt to mount 9" pedestal base? |
Boat Restoration, Building, and Hull Repair |
| 2 |
Engine Mount Lag bolt Question |
Boat Restoration, Building, and Hull Repair |
| 10 |
Please HELP with steering helmet bolt. AQ125B w/ 280 |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 18 |
found this broken bolt under my mercruiser 3.0 liter...where did it come from? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
alpha 1 transom anode bolt question |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Stripped bolt on recoil start 29502D |
Johnson & Evinrude Outboards |
| 0 |
Stripped bolt on recoil start 29502D |
Johnson & Evinrude Outboards |
| 3 |
Broken bolt on trim setup |
Johnson & Evinrude Outboards |
| 9 |
Transom plate bolt kit |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Broken bolt |
Trailers and Towing |
| 5 |
Bolt on starter getting red hot |
Mercruiser I/O & Inboard Engines & Outdrives |
| 7 |
Mystery Bolt |
Mercury & Mariner Outboards |
| 0 |
Bolt size cobra y pipe |
OMC I/O & Inboard Engines & Outdrives |
| 4 |
4.3L Alpha Torsional Damper Bolt Torque Spec |
Mercruiser I/O & Inboard Engines & Outdrives |
| 7 |
Broken starter bolt hole.. yup cracked.. fix? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
TeeNee trailer - bolt/ nut sizes ? |
Trailers and Towing |
| 2 |
What Size Bolt to Order? |
Boat Topics and Questions (not engine topics) |
| 2 |
1990 evinrude 50 lower unit removed, broken bolt drilled... what's up there? |
Johnson & Evinrude Outboards |
| 5 |
engine alignment VS. bad engine bolt/spring washer?? 3.0 MERCUISER |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
prop cone with no bolt(school me please) |
Prop Questions and Topics |
| 2 |
35hp Chrysler broken bolt/stud need help |
Force & Chrysler Outboards |
| 0 |
1986 25hp Mariner starter Bolt |
Mercury & Mariner Outboards |
| 0 |
Johnson 60ESLB70 bolt pattern |
Non-Repair Outboard Discussions |
| 3 |
Expert challlenge -- Extra Bolt -- 1998 90hp doesn't need as many as I have... |
Johnson & Evinrude Outboards |
| 1 |
What years of merc outboard tilt and trim assemblies will fit a 1970's 50hp Thun.bolt |
Mercury & Mariner Outboards |
| 2 |
Old 71/72 Mercruiser Block Drain Bolt? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Need bolt size from a schematic for Tohatsu 90 TLDI control box |
Honda & Tohatsu/Nissan Outboards |
| 0 |
BF9.9 head bolt torque and tightening sequence |
Honda & Tohatsu/Nissan Outboards |
| 1 |
Yamaha 85 bolt pattern template? |
Yamaha & Suzuki Outboards |
| 9 |
Trim tab anode bolt stripped |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Eye Bolt ?? |
Mercury & Mariner Outboards |
| 34 |
1987 chris craft, missing bolt on side of motor, waters coming out? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Suggestion for those with stripped bolt holes...... |
Yamaha & Suzuki Outboards |
| 6 |
Bolt kicker on, yes or no? Tips? |
Non-Repair Outboard Discussions |
| 10 |
Cracked block at head bolt hole in my 470 |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
3hp seahorse head bolt torque jw-11 ? |
Johnson & Evinrude Outboards |
| 2 |
broke off bolt |
Yamaha & Suzuki Outboards |
| 3 |
Shift rod bolt 1989 88 hp |
Johnson & Evinrude Outboards |
| 7 |
broken off bolt |
Yamaha & Suzuki Outboards |
| 12 |
bolt wont thread!!! |
Johnson & Evinrude Outboards |
| 2 |
alhpa1 bolt torque |
Mercruiser I/O & Inboard Engines & Outdrives |
| 20 |
winch strap bolt? |
Trailers and Towing |
| 5 |
Intake Manifold Bolt Torque Spec |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
1993 johnson 200 head bolt torque |
Johnson & Evinrude Outboards |
| 1 |
DOH! Broken bycass cover bolt - 1985 15 hp |
Johnson & Evinrude Outboards |
| 12 |
zinc bolt snapped!! |
Johnson & Evinrude Outboards |
| 17 |
1/2 x 20 oil pan banjo bolt for gXi-F? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 9 |
1990 Mercrusier 4.3LX Manifold Bolt sheared when torquing |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Broken Starter Bolt and Boss |
Johnson & Evinrude Outboards |
| 2 |
head bolt torque |
Johnson & Evinrude Outboards |
| 4 |
Bolt size for pulling flywheel 1957 18hp fastwin |
Johnson & Evinrude Outboards |
| 4 |
bolt on horse power for 120 v4 |
Non-Repair Outboard Discussions |
| 2 |
94 volvo 290 transom shield and exhaust yoke bolt torque specs? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 1 |
Evinrude 1962 10ph head bolt torque specs |
Johnson & Evinrude Outboards |
| 2 |
Volvo 270 Steering arm bolt |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 2 |
How to instal a water temperature gauge in a Johnson 70 (no sender tap, need bolt-on) |
Johnson & Evinrude Outboards |
| 13 |
( pre ?) alpha one gimbal exhaust. 3 bolt vs 4 bolt. Help please.(165 in-line six ) |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Transom Bolt Clamp Handle |
Boat Restoration, Building, and Hull Repair |
| 12 |
1977 t-bolt 850 bogs down after half throttle or above |
Mercury & Mariner Outboards |
| 4 |
Trailer wheel size standards/ bolt patterns |
Trailers and Towing |
| 8 |
Bolt on external e-rude gas tank |
Johnson & Evinrude Outboards |
| 1 |
Mystery bolt in keel near bow of 226FF |
Hurricane Deck Boats |
| 3 |
water pump replacement left me with an extra bolt AHHHHHH!!! |
Johnson & Evinrude Outboards |
| 15 |
Busted bolt stuck in my cylinder head, do I dare heat it with a Oxy/Ace torch? |
Johnson & Evinrude Outboards |
| 3 |
Bolt torque 76 OMC outdrive water pump 1/2" bolts |
OMC I/O & Inboard Engines & Outdrives |
| 18 |
broken bolt on brake actuator assembly |
Trailers and Towing |
| 15 |
Bolt or clamp the best to attach motor to boat? |
Non-Repair Outboard Discussions |
| 10 |
1984 35 hp Evinrude starter removal to get to carb to get to shift linkage bolt? |
Johnson & Evinrude Outboards |
| 18 |
2001 15hp 4-stroke Evinrude --- Inaccessible Carburetor Bolt |
Johnson & Evinrude Outboards |
| 4 |
Creating V4 lower cowl access holes for Tstat housing bolt removal....with pics |
Johnson & Evinrude Outboards |
| 3 |
Bolt torques |
Johnson & Evinrude Outboards |
| 0 |
Fastwin 4 Bolt Lower vs. 5 Bolt Lower..... |
Johnson & Evinrude Outboards |
| 4 |
Bulding new Boat called bolt -- need help |
Boat Restoration, Building, and Hull Repair |
| 3 |
Q4 seat problem, continually sliding back and forth, won't lock - located broken bolt |
Tahoe Boats |
| 1 |
Bolt head for Johnson 175 piston rod |
Johnson & Evinrude Outboards |
| 7 |
Upper oil drain bolt location on 1972 65hp johnson hydro. |
Johnson & Evinrude Outboards |
| 3 |
frozen lower unit bolt HELP |
Mercury & Mariner Outboards |
| 4 |
Big transom anode bolt question |
Boat Topics and Questions (not engine topics) |
| 4 |
Bolt threads |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
2003 Suzuki DF70 oil drain bolt Question? |
Yamaha & Suzuki Outboards |
| 8 |
Eska 5.5hp flywheel bolt |
Other Outboard Brands |
| 10 |
Building Thru--Bolt Motor Mount Stringers |
Boat Restoration, Building, and Hull Repair |
| 4 |
How to tell if a bolt is a Torque-to-Yield (TTY) head bolt ??? |
Non-Repair I/O and Inboards |
| 4 |
JOHNSON 15 cylinder head bolt torque and sequence |
Johnson & Evinrude Outboards |
| 17 |
Twisted off bolt head -- now what? |
Johnson & Evinrude Outboards |
| 4 |
4.3 GS Starter motor bolt snapped |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 3 |
Evinrude Lark Head Bolt torque |
Johnson & Evinrude Outboards |
| 1 |
Help Mercury Thunder bolt 500 50 H.P |
Other Outboard Brands |
| 1 |
Help Mercury Thunder bolt 500 50 H.P |
Mercury & Mariner Outboards |
| 7 |
Help with frozen lower unit bolt |
Johnson & Evinrude Outboards |
| 7 |
Hanger bolt swim ladder installation / '87 Starcraft |
Boat Restoration, Building, and Hull Repair |
| 4 |
470 head bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Building 'Thru-Bolt" Motor Mount Stringers |
Boat Restoration, Building, and Hull Repair |
| 1 |
head bolt torque and Flywheel torque for 9.5 sportwin 1967 |
Johnson & Evinrude Outboards |
| 0 |
OX66 250 (S250TXRX) keeps losing the "trim anode" - anyone know the spec for the bolt |
Yamaha & Suzuki Outboards |
| 16 |
What Size/Grade Pivot Bolt for a Tilt Trailer? |
Trailers and Towing |
| 2 |
please help...cyl head bolt !!!!!!! |
Johnson & Evinrude Outboards |
| 2 |
Will 1992 Force 150 powerhead bolt to a 1984 Force 125 Leg? |
Force & Chrysler Outboards |
| 4 |
pedestal seat bolt patterns |
Boat Restoration, Building, and Hull Repair |
| 13 |
Head bolt problem !!!!!! |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
1979 Chrysler Outboard Model 1154H9A - Lower unit bolt won't seat |
Force & Chrysler Outboards |
| 1 |
Bolt pattern on my trailer |
Trailers and Towing |
| 4 |
How to remove rusty bolt that hold upper and lower gearcase? |
Johnson & Evinrude Outboards |
| 2 |
Yet another 3.0L broken starter motor bolt - looking for permanent solution |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Broke Starter Bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 13 |
Broken starter bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
1980 35-hp johnson, head bolt torque |
Johnson & Evinrude Outboards |
| 5 |
Alternator Conversion - Bolt Falls Out |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Johnson Evinrude transom clamp bolt |
Johnson & Evinrude Outboards |
| 3 |
PLEASE HELP ME LOCATE SHIFT LINKAGE BOLT ON DIAGRAM '59 Big Twin 35hp shift issues |
Johnson & Evinrude Outboards |
| 2 |
Philips head bolt next to drain plug |
Johnson & Evinrude Outboards |
| 0 |
Late 60's & early 70's 20-35 H.P. bolt size |
Johnson & Evinrude Outboards |
| 7 |
Head Bolt 305027 Size? |
Johnson & Evinrude Outboards |
| 1 |
Head Bolt Stripped |
Johnson & Evinrude Outboards |
| 3 |
Power head bolt??? |
Johnson & Evinrude Outboards |
| 4 |
What is the best way to prevent the gapping bolt on a points ignition from slipping? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
How to remove this bolt |
Mercury & Mariner Outboards |
| 26 |
head bolt broke off! |
Johnson & Evinrude Outboards |
| 2 |
9.9/15 head bolt-extra problems |
Johnson & Evinrude Outboards |
| 5 |
Grady White Mystery Bolt Holes |
Boat Topics and Questions (not engine topics) |
| 3 |
Anode Bolt??? |
Johnson & Evinrude Outboards |
| 4 |
quick question,,,,bolt size and thread |
Mercruiser I/O & Inboard Engines & Outdrives |
| 19 |
Mercury 500 50 hp Thunder bolt ? |
Mercury & Mariner Outboards |
| 1 |
Yanaha 90etld water passages/bolt replacement |
Yamaha & Suzuki Outboards |
| 4 |
Need some head bolt questions |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 3 |
'06 Honda BF225 lower unit bolt loose, question... |
Honda & Tohatsu/Nissan Outboards |
| 1 |
bell houseing bolt frozen |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
Bunk Bracket Attachment Bolt Torque? |
Trailers and Towing |
| 3 |
Prop Cone Locking Bolt |
Prop Questions and Topics |
| 0 |
bolt size and thread for lower unit? |
Johnson & Evinrude Outboards |
| 1 |
Head bolt tightening sequence . |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
89 mercruiser broken starter bolt-bracket? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
How do I temporarily mount 35hp Evinrude in place of bolt-on 80hp ? |
Johnson & Evinrude Outboards |
| 3 |
bolt size prop |
Mercury & Mariner Outboards |
| 2 |
Bolt size and TPI for oil filler 1966 Merc 650 |
Mercury & Mariner Outboards |
| 2 |
Evinrude/Johnson bolt pattern |
Johnson & Evinrude Outboards |
| 1 |
1975 850 tunder bolt cant move from side to side |
Mercury & Mariner Outboards |
| 3 |
Johnson 175 broken strter bolt hole boss fix suggestions. pics. |
Johnson & Evinrude Outboards |
| 3 |
Trim sender bolt broke |
OMC I/O & Inboard Engines & Outdrives |
| 2 |
85 hp thunder bolt fuel bulb |
Mercury & Mariner Outboards |
| 1 |
Bolt for thermostat on 4.3Gi engine |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 0 |
Another question on harmonic balancer bolt and washer |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 22 |
Yahama 225 Excel Snapped one bolt and others feel the same. |
Yamaha & Suzuki Outboards |
| 2 |
part # ---> balancer bolt |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 6 |
Sheared off flywheel bolt (1957 Scott Atwater 3875 10HP) |
Other Outboard Brands |
| 3 |
water pump bolt torque specs ??? |
Mercury & Mariner Outboards |
| 1 |
Broken Head bolt cannot remove head? |
Johnson & Evinrude Outboards |
| 3 |
5.7 Motor Install. Cannot remember if the rear bolt spaces were on top or bottom. |
Mercruiser I/O & Inboard Engines & Outdrives |
| 13 |
Rusted Tilt Bolt |
Johnson & Evinrude Outboards |
| 0 |
UniFlex helm bolt question |
Boat Topics and Questions (not engine topics) |
| 2 |
mercuiser inline 6 stuck rear motor mount bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
A engine novice would like to know: what the heck IS this bolt for anyway? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Can i use a zinc bolt from home depot on exhaust plate |
Mercury & Mariner Outboards |
| 2 |
Frozen rear engine bolt, revisted |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
is my mercruiser 260 a chevy 350 4 bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 22 |
Rear engine mount bolt siezed |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Bolt patern and lbs torque for 1990 OmC 3.0 intake manifold. |
OMC I/O & Inboard Engines & Outdrives |
| 4 |
starter bolt length? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 1 |
3.0l starter solenoid bolt size? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Problem with swap of upper drive and helmet. Bolt size is different? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 24 |
Vertical Shift Shaft reattach John50 1975 cannot align bolt with hole |
Johnson & Evinrude Outboards |
| 1 |
1975 40 hp 402 thunder bolt |
Mercury & Mariner Outboards |
| 0 |
1985 mercury 60 horse hp rod bolt torque |
Mercury & Mariner Outboards |
| 3 |
Powerhead removal, how to clear corroded bolt holes? |
Mercury & Mariner Outboards |
| 0 |
Head Bolt Torque |
Johnson & Evinrude Outboards |
| 7 |
Can't remove starter motor bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
Sealing outboard - transom bolt holes..? |
Non-Repair Outboard Discussions |
| 2 |
1971 thunder bolt 800 80hp mercury |
Mercury & Mariner Outboards |
| 3 |
BBC Head Bolt Torque / help |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
motor bolt grade |
Non-Repair Outboard Discussions |
| 14 |
Exhaust Manifold broken bolt removal _ boat runs hot at high speed |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Evinrude 309924 bolt length |
Johnson & Evinrude Outboards |
| 5 |
I need help! On installing a foot on a Mercury 80hp Thunder bolt 1969 |
Mercury & Mariner Outboards |
| 1 |
Minn Kota Maxxum Through Bolt Help |
Electrical, Electronics, Audio and Trolling Motors |
| 4 |
water from head bolt hole |
Force & Chrysler Outboards |
| 5 |
Powerhead bolt material |
Johnson & Evinrude Outboards |
| 4 |
Right way to remove a connecting rod bolt(s)? |
Johnson & Evinrude Outboards |
| 2 |
1987 Alpha One Bolt Anode Replacement |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
bolt pattern |
Trailers and Towing |
| 5 |
Y-Pipe bolt pattern mystery... |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Flexplate to flywheel bolt torque? |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 2 |
intake bolt configuration |
Mercruiser I/O & Inboard Engines & Outdrives |
| 7 |
351M -351w outdrive bolt patterns |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
1955 evinrude 15hp head bolt torque specs????? |
Johnson & Evinrude Outboards |
| 4 |
Broke a motor mount bolt=yikes! |
Volvo Penta I/O & Inboard Gas Engines & Outdrives |
| 0 |
Thermostat cover bolt torque |
Yamaha & Suzuki Outboards |
| 12 |
Broke Bolt |
Boat Topics and Questions (not engine topics) |
| 2 |
Bolt Removal- Exhaust |
Force & Chrysler Outboards |
| 0 |
1988 40HP Evinrude E40ELCCS. What is bolt size for lifting bracket? |
Johnson & Evinrude Outboards |
| 4 |
bolt sequence and torque for head bolts on 1992 3.0 mercruiser |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Bolt Size & Thread- 1995 115 Evinrude Flywheel |
Johnson & Evinrude Outboards |
| 2 |
Anything special about sealing a bolt hole? |
Boat Restoration, Building, and Hull Repair |
| 1 |
shift linkage...stripped bolt |
Johnson & Evinrude Outboards |
| 0 |
1990 Johnson 40 hp shift rod bolt |
Johnson & Evinrude Outboards |
| 4 |
What HP should I bolt on the back of this Laveycraft |
Non-Repair Outboard Discussions |
| 3 |
How to bolt these new fenders properly to my trailer?? |
Trailers and Towing |
| 4 |
1958 10hp. evinrude <10016> head bolt |
Johnson & Evinrude Outboards |
| 8 |
broken bolt |
Johnson & Evinrude Outboards |
| 6 |
Exhaust Side Cover Broke Bolt |
Yamaha & Suzuki Outboards |
| 20 |
ah, another broken bolt problem. Its REALLY in there, tried everything |
Johnson & Evinrude Outboards |
| 3 |
head bolt torque |
Mercury & Mariner Outboards |
| 2 |
where is the bolt to unhook shift linkage? 25r70e |
Johnson & Evinrude Outboards |
| 16 |
Broke cyl cover bolt |
Mercury & Mariner Outboards |
| 1 |
1996/7 Force (Sears Gamefisher) 9.9 HP Head Bolt Torque and Pattern |
Force & Chrysler Outboards |
| 3 |
1969 Mercury 100 H.P. Thunder bolt lower unit |
Mercury & Mariner Outboards |
| 9 |
Head bolt torque for 115 2 stroke |
Mercury & Mariner Outboards |
| 2 |
79 305 head bolt torque 898 |
Mercruiser I/O & Inboard Engines & Outdrives |
| 8 |
flywheel bolt |
Force & Chrysler Outboards |
| 2 |
Broke off trim cyl grnd wire bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Best Bolt Sealant? |
Yamaha & Suzuki Outboards |
| 7 |
Broken bolt in flywheel |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Stuck bolt on '78 35hp johnson |
Johnson & Evinrude Outboards |
| 9 |
Broken bolt hole in head - 88 Evinrude V4 |
Johnson & Evinrude Outboards |
| 2 |
Mercruiser 5.0 v8 1995, manifold and risers bolt Torque |
Mercruiser I/O & Inboard Engines & Outdrives |
| 9 |
Bellhousing bolt?? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
'72 johnson 50hp rod and head bolt torque |
Johnson & Evinrude Outboards |
| 5 |
What Size Bolt for Engine Stand |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Yami F115 Oil drain bolt stripped! (2002) |
Yamaha & Suzuki Outboards |
| 0 |
115 rod bolt torque |
Mercury & Mariner Outboards |
| 23 |
Oh no! Now what? Starter bolt hole cracked. |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Wiring voltsGauge...rod bolt??? |
Yamaha & Suzuki Outboards |
| 13 |
Broken bolt |
Mercury & Mariner Outboards |
| 3 |
Question on a certain bolt size for my mercruiser 140 |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
1991 mercury 135 exhaust plate bolt torque settings |
Mercury & Mariner Outboards |
| 2 |
Thunder Bolt 110 9.8 Won't say running |
Mercury & Mariner Outboards |
| 11 |
Really? $42 for a bolt? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Bolt size |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
87 50hp evinrude Busted bolt from power head to steering arm? |
Johnson & Evinrude Outboards |
| 4 |
3.0l rear motor mount bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Starter Mounting Bolt Size on Mercruiser 3.0 |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
Rod bolt size |
Force & Chrysler Outboards |
| 3 |
Trim tab anode bolt/screw |
Mercury & Mariner Outboards |
| 0 |
'80 Mercury 40 T-bolt, turnover/no start-update |
Mercury & Mariner Outboards |
| 0 |
1990 yamaha transom bolt size |
Yamaha & Suzuki Outboards |
| 12 |
Bolt question |
Johnson & Evinrude Outboards |
| 3 |
Will a "67" Merc 120 bolt to a Alpha I? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Bolt missing under anode - pull lower unit? |
Mercury & Mariner Outboards |
| 6 |
Exhaust Manifold Bolt Grades? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Bolt on battery terminal stuck |
Electrical, Electronics, Audio and Trolling Motors |
| 14 |
I need to re-thread carb bolt stud |
Johnson & Evinrude Outboards |
| 0 |
4.3L Mercruiser Starter bolt repair |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Broken water pump bolt |
Mercury & Mariner Outboards |
| 4 |
Nissan 40C - Head Bolt Torque Specs? |
Honda & Tohatsu/Nissan Outboards |
| 6 |
All sorts of questions! 86 Merc 350 w/thunder bolt IV |
Mercruiser I/O & Inboard Engines & Outdrives |
| 7 |
Starter bolt size 3.0 L |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Tilting shaft bolt removal ?? :confused: |
Johnson & Evinrude Outboards |
| 0 |
Crankcase Bolt Torque 1963 75hp Starflite |
Johnson & Evinrude Outboards |
| 3 |
head bolt torque/pattern ... please |
Johnson & Evinrude Outboards |
| 6 |
Broke bolt in lower unit |
Johnson & Evinrude Outboards |
| 2 |
Alpha One - Replacing Shift Cable - Brass Bolt Stuck |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
First Time in Lower Unit - Broken Bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
What bolt size for Mercruiser 260 engine stand? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Crazy upper gearcase bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 9 |
starter bolt sheered off........ |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Starter Bolt Sheered Off..... |
Mercury & Mariner Outboards |
| 8 |
OMC 800 will a 1981-85 outdrive bolt to a 78 intermediate housing? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 18 |
Center bolt on crank pulley broke |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Head bolt torque settings and pattern |
Johnson & Evinrude Outboards |
| 6 |
Broke one bolt on thermostat cover. |
Force & Chrysler Outboards |
| 0 |
1975 70 hp head bolt torque ? |
Johnson & Evinrude Outboards |
| 8 |
Broken Lower Unit Bolt - Smooth Move.. |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Lund removable floor finger-bolt locks? |
Boat Restoration, Building, and Hull Repair |
| 0 |
Broken Lower Unit Bolt - Smooth Move.. |
Boat Topics and Questions (not engine topics) |
| 9 |
Best way to attach rope to u-bolt? |
Water Skiing |
| 6 |
Mercruiser 3.7 (470) Head bolt torque? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
1990 4.3 omc head bolt size |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Starter Bolt question for a 2001 Mercruiser 4 cyl 3 L |
Mercruiser I/O & Inboard Engines & Outdrives |
| 32 |
Oooops ! - Broken water cover bolt |
Mercury & Mariner Outboards |
| 1 |
120 hp force starter mounting bolt torque |
Force & Chrysler Outboards |
| 0 |
Transom Bolt ? on my 1972 20 HP Merc |
Mercury & Mariner Outboards |
| 7 |
Help with flywheel bolt size for pulling |
Johnson & Evinrude Outboards |
| 21 |
I broke a head bolt. Now what? |
Johnson & Evinrude Outboards |
| 1 |
sterndrive bolt replacement |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
bolt size |
Mercruiser I/O & Inboard Engines & Outdrives |
| 0 |
Repowering, need info on transom bolt patterns |
Johnson & Evinrude Outboards |
| 4 |
Bolt size for 6hp flywheel puller? |
Johnson & Evinrude Outboards |
| 12 |
Drilling through a grade 8 bolt |
Force & Chrysler Outboards |
| 3 |
Exhaust Plate Bolt Snapped while torquing, can I leave it out? |
Johnson & Evinrude Outboards |
| 1 |
oops... busted bolt on 50 hp |
Johnson & Evinrude Outboards |
| 2 |
Mercury 500 t bolt ignition |
Mercury & Mariner Outboards |
| 6 |
Starter bolt fallen into bilge |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
suzuki dt65 head bolt torque settings |
Yamaha & Suzuki Outboards |
| 8 |
Broken impeller housing bolt |
Johnson & Evinrude Outboards |
| 2 |
3.0LX Oil Pan Bolt Size / Thread |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
M.C. stern drive, broken bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
7.4 Mercruiser Starter Bolt Broken - Straight Bolt Pattern Starter Work Around? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Bolt Hole Pattern for 90hp |
Johnson & Evinrude Outboards |
| 2 |
1979 chrysler 45 hp Head bolt torque. |
Force & Chrysler Outboards |
| 0 |
Head bolt torque for 72 Johnson 65 hp |
Johnson & Evinrude Outboards |
| 10 |
7th bolt size on foot? |
Force & Chrysler Outboards |
| 3 |
Alpha 1, gen. 1 impeller housing bolt torque |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
What Kind of Bolt is it? |
Johnson & Evinrude Outboards |
| 2 |
93 mariner, 135, head bolt lbs? |
Mercury & Mariner Outboards |
| 1 |
Mariner 135 HP head cyl bolt torque |
Mercury & Mariner Outboards |
| 5 |
help finding correct hinge bolt |
Boat Restoration, Building, and Hull Repair |
| 2 |
cylinder head bolt torque pattern |
Johnson & Evinrude Outboards |
| 1 |
Question Head Bolt Re-torque |
Mercury & Mariner Outboards |
| 15 |
How to extract a broken starter bolt from the block without removing the engine?? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Shear start bolt? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
89 Force can i hexi coil the head bolt holes? Or is this motor a bust? |
Force & Chrysler Outboards |
| 3 |
no spark 850 merc. thunder bolt 4 |
Mercury & Mariner Outboards |
| 9 |
HELP!!! 25hp Starter Bolt Hole Stripped |
Johnson & Evinrude Outboards |
| 41 |
Do i need to bolt my motor on? |
Boat Topics and Questions (not engine topics) |
| 6 |
No Bolt, Swim platform mounting bracket for trolling motor? |
Boat Topics and Questions (not engine topics) |
| 1 |
Bolt patern |
Mercury & Mariner Outboards |
| 5 |
Trim tab bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Tohatsu head bolt torque |
Honda & Tohatsu/Nissan Outboards |
| 7 |
Johnson to Mercury Outboard Bolt Pattern The Same? |
Mercury & Mariner Outboards |
| 43 |
cant get the flywheel off,broke grade 8 bolt |
Johnson & Evinrude Outboards |
| 2 |
1975 50hp Evinrude bolt Torque specs? |
Johnson & Evinrude Outboards |
| 2 |
Cyl Head Bolt Torque Query 120HP '91 |
Force & Chrysler Outboards |
| 10 |
Need to know bolt torque |
Mercruiser I/O & Inboard Engines & Outdrives |
| 8 |
4 Bolt Vs. 2 Bolt main |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
Help with broken bolt in waterpump |
Johnson & Evinrude Outboards |
| 7 |
Snapped a bolt installing lower unit. Now what? |
Johnson & Evinrude Outboards |
| 1 |
Mercruiser Starter bolt shearing |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Please help !! Powerhead bolt location?? F225 |
Yamaha & Suzuki Outboards |
| 1 |
Need this bolt... |
Mercruiser I/O & Inboard Engines & Outdrives |
| 14 |
sheared off gear oil bolt |
Force & Chrysler Outboards |
| 18 |
SBC 5.7 Vortec cam & other bolt ons rebuild |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
Shift Rod Bolt-Stripped |
Johnson & Evinrude Outboards |
| 8 |
prop bolt, how tight? 76' johnson135 |
Johnson & Evinrude Outboards |
| 19 |
I broke the bolt for my anode; now what do I do?? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
U bolt torque |
Trailers and Towing |
| 1 |
Need a new transom bolt / thumb screw / clamp screw |
Johnson & Evinrude Outboards |
| 3 |
bolt on fender support and leaf spring mounting shackles attached |
Trailers and Towing |
| 3 |
Broken lower unit bolt 1988 80hp |
Mercury & Mariner Outboards |
| 9 |
lower shock mount bolt broke...now what? |
Mercury & Mariner Outboards |
| 1 |
SUZUKI DT75 (1986) bolt threads |
Yamaha & Suzuki Outboards |
| 9 |
1985 Merc 90HP - Will 115 Block bolt right up to it? |
Mercury & Mariner Outboards |
| 5 |
Lower unit leaking from bolt? |
Force & Chrysler Outboards |
| 5 |
top cap bolt stuck |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
what power head will bolt up to my lower unit |
Mercury & Mariner Outboards |
| 2 |
broken bolt on gear case |
Johnson & Evinrude Outboards |
| 4 |
Broken Bolt on Mid leg of 1983 FORCE 85 HP |
Force & Chrysler Outboards |
| 0 |
BIA Standard Bolt Pattern |
Boat Restoration, Building, and Hull Repair |
| 5 |
'78 Merc 1150 mounting bolt pattern. BIA? |
Non-Repair Outboard Discussions |
| 9 |
broken bolt suzuki DT65 |
Yamaha & Suzuki Outboards |
| 0 |
Head Bolt Torque 87 70hp Evinrude |
Johnson & Evinrude Outboards |
| 5 |
Evinrude powerhead bolt torque specs ????? |
Johnson & Evinrude Outboards |
| 3 |
Broken Pivot Pin Lock Bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Help! Stripped Block Thread AND Broken Bolt |
Johnson & Evinrude Outboards |
| 18 |
what year, newer manifold bolt pattern |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
Head gasket bolt torque on a 80 or early 90s model johnson 40hp |
Johnson & Evinrude Outboards |
| 34 |
Broken Bolt V-4 90hp |
Johnson & Evinrude Outboards |
| 4 |
Bolt hole pattern for engine mounting |
Non-Repair Outboard Discussions |
| 7 |
exhaust cover bolt broken |
Yamaha & Suzuki Outboards |
| 4 |
1986 mercruiser transom plate bolt hole size? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 1 |
2003 Suzuki 140 Magneto Bolt |
Yamaha & Suzuki Outboards |
| 3 |
I/O Merc 140/3.0L 4 cyl head bolt torque? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Powerhead/LU bolt corrosion |
Johnson & Evinrude Outboards |
| 10 |
Snapped Bolt...Any Ideas? Please Help!! |
Force & Chrysler Outboards |
| 1 |
Snapped Bolt...Any Ideas? Please Help!! |
Boat Topics and Questions (not engine topics) |
| 9 |
4 bolt mains? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
1983 Johnson 4.5 head bolt torque |
Johnson & Evinrude Outboards |
| 0 |
90 hp Johnson (1996) head bolt torque specs |
Johnson & Evinrude Outboards |
| 5 |
Bolt size help |
Mercruiser I/O & Inboard Engines & Outdrives |
| 5 |
Broken Bolt on 85hp Lift Bracket |
Force & Chrysler Outboards |
| 19 |
Bolt Inside my Engine |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Bolt lube, Anti-seize anyone? |
Johnson & Evinrude Outboards |
| 2 |
Zinc anode bolt help! |
Mercruiser I/O & Inboard Engines & Outdrives |
| 3 |
Can I Just bolt on my evinrude 140hp (early 80's) ro do I need to install... |
Johnson & Evinrude Outboards |
| 2 |
Mark 58/58A - bolt up lower unit before powerhead? |
Mercury & Mariner Outboards |
| 10 |
Can I use a nut and bolt in place of shear pin |
Johnson & Evinrude Outboards |
| 5 |
50 HP Head Bolt Torque |
Yamaha & Suzuki Outboards |
| 4 |
Bolt - lower unit 7/16 next to trim-tab housing stripped- 1987 90HP |
Johnson & Evinrude Outboards |
| 2 |
1985 85HP head bolt torque |
Force & Chrysler Outboards |
| 8 |
Acceptable to Put Lok-Tite on Alternator Bracket Bolt? |
Mercruiser I/O & Inboard Engines & Outdrives |
| 2 |
Mercruiser Starter, shear off long bolt |
Mercruiser I/O & Inboard Engines & Outdrives |
| 4 |
Mercruiser torque on head bolt 3.7 470 |
Mercruiser I/O & Inboard Engines & Outdrives |
| 6 |
1989 Jonhson 200 HP - Broken Head Bolt |
Johnson & Evinrude Outboards |
| 17 |
How to torque the flywheel bolt...without a torque wrench? |
Johnson & Evinrude Outboards |
| 1 |
Force motor mount bolt |
Force & Chrysler Outboards |
| 6 |
cdi help (rod bolt) |
Yamaha & Suzuki Outboards |
| 0 |
80 horse 80,s merc t-bolt abruptly dies past half throttle |
Mercury & Mariner Outboards |
| 2 |
1986 90 hp johnson stripped starter bolt |
Johnson & Evinrude Outboards |
| 5 |
Bolt turns up in bilge |
Mercruiser I/O & Inboard Engines & Outdrives |
| 16 |
To carriage bolt or not carriage bolt |
Trailers and Towing |
| 0 |
2004 Yamaha 225 4-stroke Head bolt torque settings |
Yamaha & Suzuki Outboards |
Bolts & Washers
Hardware
Boat Trailer Wheels & Tires
Boat Trailer Lights
Trailers and Parts