Volvo Penta exhaust riser

Blake0192

Recruit
Joined
Apr 13, 2024
Messages
5
Hello I have a 2003 Volvo Penta 3.0 I just put a different motor in my boat bc my motor was locked up. on this new motor I have a black hose off the exhaust riser that I didn’t have on my old motor can I just put a plug in it?
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,568
What is the other end connected to?

Salt away is a tee in the raw water line, back to a glorified windshield washer reservoir. Doesn't look like a salt away / neutra salt installation
 

Blake0192

Recruit
Joined
Apr 13, 2024
Messages
5
What is the other end connected to?

Salt away is a tee in the raw water line, back to a glorified windshield washer reservoir. Doesn't look like a salt away / neutra salt installation
It wasn’t connected to anything I bought the motor from a guy I believe it was connected to the lower unit. I plugged it. Let it run for about 30 minutes. It seem to be doing fine.
 

dubs283

Vice Admiral
Joined
Jul 27, 2005
Messages
5,129
Only time I've seen a line like that from the exhaust cooling passage is for a dripless propshaft packing on an inboard/v drive or a hot/cold raw water shower

It'd be best to abate the barb and hose and just plug the hole
 

Blake0192

Recruit
Joined
Apr 13, 2024
Messages
5
Only time I've seen a line like that from the exhaust cooling passage is for a dripless propshaft packing on an inboard/v drive or a hot/cold raw water shower

It'd be best to abate the barb and hose and just plug the hole
Thank you
 

ta79pr

Cadet
Joined
Jul 28, 2022
Messages
24
Page 463 of the Volvo Penta service manual shows the 98 model of the 3.0 has a hose to the riser from the thermostat block.
 

Attachments

  • Screenshot_20240415_215204_Drive.jpg
    Screenshot_20240415_215204_Drive.jpg
    474.9 KB · Views: 4

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
8,812

ta79pr

Cadet
Joined
Jul 28, 2022
Messages
24
To add to the puzzle, it appears Volvo was making some various configurations for the 3.0 during the 90s. Here is the color cooling diagram, shows a version of the hose from the riser but this time to the exhaust itself.
 

Attachments

  • Screenshot_20230529_113455_Drive.jpg
    Screenshot_20230529_113455_Drive.jpg
    742.2 KB · Views: 1

ta79pr

Cadet
Joined
Jul 28, 2022
Messages
24
And then a version plumbed to the steering cooler (mechanical or power). Good luck, interested as to which is most correct for your application/swap.
 

Attachments

  • Screenshot_20240416_065243_Drive.jpg
    Screenshot_20240416_065243_Drive.jpg
    630.4 KB · Views: 2
Top