Johnson 70 HP alternative for part for Lever to Link Guide - 0336456

[drazmo]

The link guide on my 1994 Johnson 70hp has split and may go any second. I found the part number online 0336456 but it is out of production. I also checked with my local Johnson/Evinrude dealer and they don't have in stock and can't order it. Has anyone found an alternative?

 

[bob johnson]

The link guide on my 1994 Johnson 70hp has split and may go any second. I found the part number online 0336456 but it is out of production. I also checked with my local Johnson/Evinrude dealer and they don't have in stock and can't order it. Has anyone found an alternative?

Check the cross re,fe,re,nce, to see what years and hp models used the same part

 

[racerone]

If in Canada----evinrudeparts.ca ------Might be able to help.

 

[saltchuckmatt]

Not sure if this is real or not....other wise maybe someone with a parts motor.

GUIDE - Hunts Marine

Evinrude spare part - GUIDE - 0336456

www.huntsmarine.com.au

 

[drazmo]

Not sure if this is real or not....other wise maybe someone with a parts motor.

GUIDE - Hunts Marine

Evinrude spare part - GUIDE - 0336456

www.huntsmarine.com.au

It looks like they have it in stock. Submitted the order waiting to see what they get back for the shipping cost from AU. Since it's a small part should be somewhat reasonable.

 

[drazmo]

If in Canada----evinrudeparts.ca ------Might be able to help.

Sent them an email. Waiting to hear back. Couldn't order it from their website to ship to the US.

 

[drazmo]

It looks like they have it in stock. Submitted the order waiting to see what they get back for the shipping cost from AU. Since it's a small part should be somewhat reasonable.

Got email its also out of stock.

 

[saltchuckmatt]

Figures

 

[racerone]

Should not be hard to make or find a good used one !

 

[Faztbullet]

Just convert it back to 1988 style with rod and ball

 

[drazmo]

Just convert it back to 1988 style with rod and ball

I tried looking at older 1988 style engine and I can get the ball but the rod is also out of production now.

 

[drazmo]

I was able to design and 3d print a version of the part. So far it seems to be holding. In case anyone needs the part here is the STL file I created. Slightly different but seems to fit well.

 

[tphoyt]

I was going to suggest this. Well done.
For those that don’t have access to a 3d printer check with your local high school. They sometimes find stuff like this as an interesting project for the class room.