Woodonglass
Supreme Mariner
- Joined
- Dec 29, 2009
- Messages
- 25,927
Re: 1972 Cobia 15 ft restore
Bill, you might try a sharp chisel to knock off the heads of the rivets and then a Punch Chisel to knock em out. They can spin on you and make drilling a PITA! If you are gunna use screws to put it back on then use an oversized bit and drill em out. You can glass a 1 1/2" backer board on the inside of the hull for the screws to bite into on the re-install
Bill, you might try a sharp chisel to knock off the heads of the rivets and then a Punch Chisel to knock em out. They can spin on you and make drilling a PITA! If you are gunna use screws to put it back on then use an oversized bit and drill em out. You can glass a 1 1/2" backer board on the inside of the hull for the screws to bite into on the re-install