Search results

  1. S

    Seadoo - Perko LED light swap

    Have a 2012 Sea-Doo 210 challenger with perko incandescent lights. The bulbs are festoon style 1044 and measure 1 and 1/8 in. I would like to replace them with blue leds. The problem is I can not find any of the same length. 1 1/8 is approx. 28.5 mm and all I can find is 31 mm. It seems as if...
  2. S

    Johnson/OMC Power tilt Popping

    1999 70hp johnson outboard. The tilt operates fine, but while it is moving it makes a loud cracking or popping noise. It is coming from either the motor or the hydraulic piston. I have no idea how these work. Any one know what could be causing this.... dirty fluid.... dirty filter...... air in...
  3. S

    1998 Johnson Tilt Issue

    I have a 1998 70hp Johnson with power tilt. The engine moves up and down fine but when it is moving it will make a loud cracking/popping sound. It appears to be coming from what I think is the hydrualic motor. Any ideas as to the issue. Here is a link to a video of the engine. 1998 Johnson...
  4. S

    Tohatsu 4 hp making strange vibrating humming noise. Flywheel???

    It does it at all speeds, a little less at idle, but some times it will do it and some tines it won't, it doesn't do it all the time, also when it does it I will put it in neutral and it stops but other times neutral doesn't stop it and I have to turn off the engine to make it stop. Please help...
  5. S

    is it possible to have a harmony resonance on an inflatable

    is it possible to have a harmony resonance on an inflatable Achilles lsi-104 my tohatsu if vibrating and it is a mystery noise please view videos and let me what it sounds like http://www.youtube.com/watch?v=6f6edUnYGC4&list=UURI2gOJq7IVyzU5pDg12gxA&index=1&feature=plcp...
  6. S

    4 Hp Nissan not starting after running out of gas

    i ran my 4 hp nissan/tohatsu 4 stroke out of gas (i had more ,i use the internal tank)so i refilled it with gas and it would not restart i had to row the boat a half mile to my dock and then it took a half of an hour of blasting starting fluid into the carb and pulling it through for it to...
  7. S

    Tohatsu 4 hp zinc anode fused to Lower Unit

    my zinc will not come off i removed the screw, hit it with a hammer, screwdriver, dremel, and drilled holes into it, also gave it a wd-40 soak. . i also drove the engine around for a few days with no bolt holding on the zinc hopping it with vibrate loose but nothing. any ideas would be appreciated
  8. S

    4hp Nissan marine smoking after oil change

    Is it normal that this is happening it does it when I rev it up and I remember it doing this last time I chaned the oil..?
  9. S

    Volvo IPS vs CMD Zeus

    what is better i have driven both just want some other opinions
  10. S

    4 HP Nissan zinc seized

    my sic is seized and i want to replace it. how can i get it off?
  11. S

    Lofrans project 1000 clutch nut broken

    Re: Lofrans project 1000 clutch nut broken I don't have any pictures unfortunately but this is a screenshot of the parts break down and the part that broke off is part 947 in the picture the thing i don't get is that it would appear that it just thread in and out but when it is not broken it is...
  12. S

    4 HP Nissan Flushing Plug

    Re: 4 HP Nissan Flushing Plug my engine is an NSF4BD is this it, the nut I'm pointing at with the screw driver?
  13. S

    Lofrans project 1000 clutch nut broken

    Clutch nut broke off on my project 1000 lofrans windless and I need to get it replaced the problem is the it broke off in the top of the windless. Anyone know how to get it off?
  14. S

    Drip less shaft seal 2006 340 sundancer

    Is it dangerous to use the boat with a known leakingbshaft seal? It leaks pretty good after running for a period of time and then stops to almost no flow at all?
  15. S

    4 HP Nissan Flushing Plug

    I own a 4 hp nissan 4 stroke and I know that i have seen a hose adapter, on other outboards, that plugs into the bottom of the motor but I don't know where it plugs into and where to buy it? Or would it be better to just put it in a bucket of water?
  16. S

    Nissan 4 hp water flow

    4 hp Nissan water flow is not consistent at idle it will be flowing with little pressure then all of a sudden it with start squirting out at a good pressure. It does the same thing at all engine speeds. Is this an indication of a bad impeller and can that cause a strange humming/buzzing noise...
  17. S

    4 hp Nissan strange noise.

    What is the strange buzzing/humming coming from my 4hp 4 stroke tohatsu outboard? It does it at all speeds, a little less at idle, but some times it will do it and some tines it won't, it doesn't do it all the time, also when it does it I will put it in neutral and it stops but other times...
Top