Have a 2012 Sea-Doo 210 challenger with perko incandescent lights. The bulbs are festoon style 1044 and measure 1 and 1/8 in. I would like to replace them with blue leds. The problem is I can not find any of the same length. 1 1/8 is approx. 28.5 mm and all I can find is 31 mm. It seems as if...
1999 70hp johnson outboard. The tilt operates fine, but while it is moving it makes a loud cracking or popping noise. It is coming from either the motor or the hydraulic piston. I have no idea how these work. Any one know what could be causing this.... dirty fluid.... dirty filter...... air in...
I have a 1998 70hp Johnson with power tilt. The engine moves up and down fine but when it is moving it will make a loud cracking/popping sound. It appears to be coming from what I think is the hydrualic motor. Any ideas as to the issue. Here is a link to a video of the engine.
1998 Johnson...
It does it at all speeds, a little less at idle, but some times it will do it and some tines it won't, it doesn't do it all the time, also when it does it I will put it in neutral and it stops but other times neutral doesn't stop it and I have to turn off the engine to make it stop. Please help...
is it possible to have a harmony resonance on an inflatable Achilles lsi-104 my tohatsu if vibrating and it is a mystery noise
please view videos and let me what it sounds like
http://www.youtube.com/watch?v=6f6edUnYGC4&list=UURI2gOJq7IVyzU5pDg12gxA&index=1&feature=plcp...
i ran my 4 hp nissan/tohatsu 4 stroke out of gas (i had more ,i use the internal tank)so i refilled it with gas and it would not restart i had to row the boat a half mile to my dock and then it took a half of an hour of blasting starting fluid into the carb and pulling it through for it to...
my zinc will not come off i removed the screw, hit it with a hammer, screwdriver, dremel, and drilled holes into it, also gave it a wd-40 soak. . i also drove the engine around for a few days with no bolt holding on the zinc hopping it with vibrate loose but nothing. any ideas would be appreciated
Re: Lofrans project 1000 clutch nut broken
I don't have any pictures unfortunately but this is a screenshot of the parts break down and the part that broke off is part 947 in the picture the thing i don't get is that it would appear that it just thread in and out but when it is not broken it is...
Clutch nut broke off on my project 1000 lofrans windless and I need to get it replaced the problem is the it broke off in the top of the windless. Anyone know how to get it off?
Is it dangerous to use the boat with a known leakingbshaft seal?
It leaks pretty good after running for a period of time and then stops to almost no flow at all?
I own a 4 hp nissan 4 stroke and I know that i have seen a hose adapter, on other outboards, that plugs into the bottom of the motor but I don't know where it plugs into and where to buy it? Or would it be better to just put it in a bucket of water?