1996 50hp Evinrude
last time out seemed like a fuel problem was hard to start but fired up run for bout 5mins or so then started to cut out and bog down and pick back up mess with throttle or play with it and it would go ahead and go but then started dying but would start right back up we made...
83 alpha 1 120hp was out and heard like a miss in motor and it bogged for a split sec. and sounded like went to neutral. got towed in and got it home took the top of outdrive off and gears eat off, no water in oil and the oil looked good except the metal in it, was nice n shiny in the sun...
1983 120 de winter rising tried firing up old gal on muffs, had to mess with the points had no fire, but while I was messing with that I seen brown kinda thick stuff in the hull under motor and was coming from where the starter is at from fly wheel cover. well got it running still a few drips...
1983 baretta 16 ft 120 heres my problem put new floor, foam, all the fun stuff:) . last year and took it out 10 times or so after restore. done great all but for the side to side rocking while moving, like when someone moved or got on some one elses wake, even got thrown down...
can you just get the outer cable i guess just the cable tube with the threaded end that goes into the gear box? my inter cable is good it has pulled out of the threaded part, after just changeing the bellow:facepalm:and put all back together..knew it went back to easy. if so what would be the...
alpha 1983 now is this a common thing ? just a bad seal or somthing else ? i have never seen them leak oil out of the water pick up just on the right side, i have had it off for awhile why i was redoing the floor and transom and it was not leaking before or i did not notice.just got in Jan...
its on a 83 120 mec. just redone transome and all, so just put all back together and took it out for a water test leak, well it leaked:facepalm: in water looked like shift bellow cause moved it and would not leak as bad, well got home and found a hole in the shift bellow.... now can i replace it...
will it hurt to fill the ski locker wiyh foam, cause when i put the new deck down i dont plan on making acess to it, or does it need to be free of foam for water drainage, any ideas????
being seeing this on tv and now seen at wall-mart and our feed store, what is yall thoughts on this stuff? thinking about getting a few cans to colt over were i am going glass and reasin(after),like all the corners and joins on the stingers and transom. my thinkn it would just add alittle more...
workn on a full rebuild and just got the transom in and fiberglassed in....just cut the key hole and drilled the plug hole yesterday and called it a day....and 2day it rained all day hard at that, and i had not got around to treatn the key hole and plug hole and it got soaked...so should it be...
redoing a baretta 16 footer with a 120 mec., got to replace all wood:facepalm: what do i need to make the front motor mount out of? would a 4x4 treated post work glassed in ?
trying to figure how to do this were i can keep it on one thread, my thread started off being just askn about spider cracks now its ending up to be a full restore. i can change the first post title but not the main thread title, any help or can u even change this thanks
Re: drill holes and spider cracks would this b ok to do?
heres a pic of the new floor the last owners put in a year ago....lol.... going to half to replace transom also....how bad is it pulln motor and drive or really puttn back in takn out dont look to bad, should not half to mess with the...