Recent content by mikweb

  1. M

    2006 Trophy 2052WA 4.3 merc I/O

    To get to the in-line fuse at the starter post looks difficult. Do I need to remove the exhaust manifold? No power to either side of 50 amp breaker. Appreciate your help...
  2. M

    2006 Trophy 2052WA 4.3 merc I/O

    I am going to bypass switch on shifter and see if that works.
  3. M

    2006 Trophy 2052WA 4.3 merc I/O

    No power to gauges. When I supply power to ignition breaker it powers everything up and will turn over.
  4. M

    2006 Trophy 2052WA 4.3 merc I/O

    Noticed today with #2 battery connected and remove ground from battery #1 I have faint power to ground anywhere on the motor. Has to be a corroded ground somewhere I think.
  5. M

    2006 Trophy 2052WA 4.3 merc I/O

    Gauges do not power up, no power to on either side of push button breaker.
  6. M

    2006 Trophy 2052WA 4.3 merc I/O

    Are you talking about the switch on the shifting mechanism? Today I noticed that I have power to ground. Weak signal but dc test light lights up.
  7. M

    2006 Trophy 2052WA 4.3 merc I/O

    Put batteries in today and was going to get it ready for the season. I have no power to the ignition. All of the accessories work on the dash. Anyone have this problem before and could shed some light?
  8. M

    89 Merc 2.4 Laser 220 EFI

    THis motor constantly loads up after sitting off for a few minutes. It takes about 3-5 minutes to get the motor to build any rpm's. I took it to the local dealer and he told me it runs great. I assume he did not put it under a load. I have heard that on this motor water will enter the exhaust...
Top