Latest activity

What's new New posts Latest activity
  • Scott Danforth
    Scott Danforth replied to the thread No dipstick on 1989 era 3.0L?.
    I remember trans pans with drain plugs
  • Scott Danforth
    Scott Danforth replied to the thread Boats from work..
    Let me check on getting you a bit of the 103 pattern. I would use gator step over seadek
  • alldodge
    alldodge replied to the thread Boats from work..
    Forgot the pic but does look like Gibco G4 103 pattern. That said this is really thin, and most folks that buy these boats get Seadeck...
  • alldodge
    alldodge replied to the thread Merc 250 Verado Fuel increase.
    Low voltage beeps Let the Bats sit off the charger for a few hours and all 3 read right at 12.7V These are true AGM so full charge...
  • matt167
    matt167 replied to the thread New old boat checklist..
    Both deck and transom are solid and checked out or I would not have bought it. Pretty well kept boat. When I went to look at it, I was...
  • W
    Willyclay reacted to bassbugy's post in the thread Engine Identification with Like Like.
    Update: I ordered a voltage regulator for a Suzuki DF70 from Amazon for 29.99. It was a chore to replace as it was behind the electrical...
  • A
    airshot reacted to rolmops's post in the thread New old boat checklist. with Like Like.
    The two big things that you did not mention are the transom wood and the flotation foam. I bought a 1989 221 Islander, which is...
  • A
    airshot reacted to JASinIL2006's post in the thread New old boat checklist. with Like Like.
    A wise man would pull, clean and repack the trailer bearings, too.
  • rolmops
    rolmops replied to the thread New old boat checklist..
    The two big things that you did not mention are the transom wood and the flotation foam. I bought a 1989 221 Islander, which is...
  • alldodge
    alldodge replied to the thread Merc 250 Verado Fuel increase.
    Cowling note Yesterday I lifted the cowl up, lowered in place and handle snapped lock in place. Today I removed/installed it for 20...
  • alldodge
    alldodge replied to the thread Need aluminum gas tank fitting recommendations.
    Need the depth of the tank where the float is mounted and where the pickup tube will be. Want a float that is about one inch shorter...
  • alldodge
    alldodge replied to the thread Merc 250 Verado Fuel increase.
    You were right and the O-ring had a crack, replaced and took readings. Manual list 42.1-43.9 psi at idle - I read 39 psi and vibrating...
  • P
    Pmt133 reacted to matt167's post in the thread New old boat checklist. with Like Like.
    It looks like it takes a low shank walking foot, so I should be able to get one
  • matt167
    matt167 replied to the thread New old boat checklist..
    It looks like it takes a low shank walking foot, so I should be able to get one
  • B
    Bhuie replied to the thread 99 Volvo 5.0GL.
    I did. There’s a tube but no screen or anti siphon ball. I spoke with a mechanic and let him know what what was going on and he wondered...
    • IMG_6331.jpeg
Show older items
Top