Project Fishing boat

brc1981

Cadet
Joined
May 25, 2008
Messages
18
This is the project boat I received free and started last fall. Its a 1973 fiberglass 14ft Sea King.

Before:

IMG_0709.jpg


IMG_0710.jpg


IMG_1684.jpg


trailer.jpg


After:

trailer-after.jpg

running boards have gray carpet on them, this pic was done after the paint was finished.

boat3.jpg


I've also redone the interior with new decking, gray carpet, paint, and seats. I don't have any pics yet, have been too busy fishing. I used Rustoleum marine paint for the exterior (4 coats with wet sanding in between each) and just regular Rustoleum hunter green on the interior. I wired it with switches for lights and an aerator for the live well under the center bench. I have a Mariner 9.9HP and an Evinrude 4HP that I use depending on where I'm going along with a 36lb trolling motor.

I'll try to get interior pics added in the near future.
 

danond

Lieutenant Junior Grade
Joined
Jun 11, 2007
Messages
1,118
Re: Project Fishing boat

You may want to move this to the completed projects page, unless you're thinking you have some questions about the process.
 
Top