AmericanWarrior
Recruit
- Joined
- Jul 5, 2022
- Messages
- 1
After two hours cruising down the river my mercury engine cut out. I was able to restart about 10.minutes later and putted a mile down the river at 1500 RPM.
Following day I attempted to fox reverse gate and then a hose clamp let go and about 10 inches of water was below engine. I drained the water, fixed the clamp.and went back on water.
Boat felt great then about 10.minutes engine failure. Took off head and piston on bottom #6 crown burnt off. The ring was hanging and cylinder looks okay but has melted aluminum on wall.
2000 Sugar Sands Tango 4+2 was rebult in 2015. Appreciate any insight into what probably happened and should I invest to get boat running. It's in solid shape and wonderful boat for family.
Following day I attempted to fox reverse gate and then a hose clamp let go and about 10 inches of water was below engine. I drained the water, fixed the clamp.and went back on water.
Boat felt great then about 10.minutes engine failure. Took off head and piston on bottom #6 crown burnt off. The ring was hanging and cylinder looks okay but has melted aluminum on wall.
2000 Sugar Sands Tango 4+2 was rebult in 2015. Appreciate any insight into what probably happened and should I invest to get boat running. It's in solid shape and wonderful boat for family.