Can anyone tell me the needle valve turnout for a l982 Mercury 9.8hp motor. Thanks, Tom
T tmryan Cadet Joined Dec 8, 2001 Messages 27 Dec 9, 2001 #1 Can anyone tell me the needle valve turnout for a l982 Mercury 9.8hp motor. Thanks, Tom
T Trent Captain Joined Nov 17, 2001 Messages 3,333 Dec 9, 2001 #2 Re: Merc 9.8 carb needle valve turnout Start with 1.25 to 1.50 turns from seated.. With the engine warmed up in gear in the water. Every engine is different. But thats a good starting point.
Re: Merc 9.8 carb needle valve turnout Start with 1.25 to 1.50 turns from seated.. With the engine warmed up in gear in the water. Every engine is different. But thats a good starting point.
O ODDD1 Lieutenant Junior Grade Joined Jan 23, 2001 Messages 1,054 Dec 9, 2001 #3 Re: Merc 9.8 carb needle valve turnout up here,[colder water] they usually run 1 1/2 to 1 3/4 turns out from seat......
Re: Merc 9.8 carb needle valve turnout up here,[colder water] they usually run 1 1/2 to 1 3/4 turns out from seat......
