evin300- found the wiring problem

[wmsclan]

Well, I think I found the problem, not really wiring at all. The vacuum diaphram on the side of the engine that controls the shifting was weather cracked and loosing vacuum. Hopefully this will clear the problems. Still a little concerned with the bottom cylinder not firing like it should.

 

[evin300]

Re: evin300- found the wiring problem

Good! I hope that solves your problem. There was some good advice on the other thread about the cylinder issue, Good Luck

 

[wmsclan]

Re: evin300- found the wiring problem

Thanks for all your time, patience and HELP!!!!!