Electronics question

tedmarx38

Recruit
Joined
Mar 10, 2022
Messages
2
Electronics Questions - apologies is I use the wrong terminology:

My 18 foot boat is from 2007 with a Honda bf20d 20 hp motor. The electronics are under the steering wheel/cockpit(?), and it’s very cramped and hard to access.

I frequently have blown fuses and failed circuits. My questions concern doing direct cables to the two that frequently fail: the Huminbird Helix 7 fish finder and the live well pump.

If I string cables to these and put the appropriate amp fuses (blade style) into inline fuse holders, will this be okay? I did it for the anchor winding gadget a few years ago with no problems. I’m just not sure if they have to be run through the electrical circuit panel where all the other fuses for lights and so on reside.

Thanks!!
 

legalfee

Petty Officer 1st Class
Joined
May 10, 2018
Messages
383
What I did was to put a lawn tractor battery under the helm to power my stereo and Hummingbird. And direct wire them.
 

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,068
Electronics Questions - apologies is I use the wrong terminology:

My 18 foot boat is from 2007 with a Honda bf20d 20 hp motor. The electronics are under the steering wheel/cockpit(?), and it’s very cramped and hard to access.

I frequently have blown fuses and failed circuits. My questions concern doing direct cables to the two that frequently fail: the Huminbird Helix 7 fish finder and the live well pump.

If I string cables to these and put the appropriate amp fuses (blade style) into inline fuse holders, will this be okay? I did it for the anchor winding gadget a few years ago with no problems. I’m just not sure if they have to be run through the electrical circuit panel where all the other fuses for lights and so on reside.

Thanks!!
You will have no problem executing your plan. Both my chartplotters are wired directly to the house battery
 

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,739
Question remains, why is the Helix blowing fuses?

Helix 7 requires a 3 amp fuse.
 

mike_i

Ensign
Joined
Jun 28, 2017
Messages
942
I would want to know why the fuses are blowing. You have an issue. Can you see and trace the wiring to check for bad connections, burnt insulation or other problems?
 
Top