No Title
Ok, here`s some more photos. In lack of a Deutsch 6-pin connector, I made a provisional connection;
Pin1 Yellow black to M
Pin2 Yellow/red to S
Pin3 Black/white to M
Pin4 Purple to A
Pin5 Purple/red to B
Pin6 Purple/white to C
I attached a photo of the twi bullet connectors that come from the control box.
There also is one more connection I do not understand; There is a bullet connector that seems to fit together, the female part is black and comes with the VRO-harness, the male plug is green (trim) and comes with black and white/brown (Trim sender to gauge, I think). Should these be connected??? Please see picture 3 and 4.
I do not know if this gives enough information?