Re: Clanton: Model number for 150 GT
I thought 60 also,but my book says 90 degree, the ignition system not the same. Your engine should have 1 power pack and 6 coils 3 on each clyinder head. the timer sensor is located under stator under flywheel. The timer should have 2 sets of 4 wires comming out it going to pack, connector marked A,B,C,D. disconnect the 2 connectors use ohmmeter red led to D, black to A,B,C, other side same. readings should be close. Next Jumper the 2 D termials. meter black lead to engine ground red to A,B,C, readings should close. When you connected the 2 D termials this causes the timer to shift from Quick Start sensor to run sensor.Check for loose connectors, broke wires.
