Chrysler outboard 130 hp fuel pump

[Bp4422]

so there was an electric fuel pump that was on this boat when I purchased it a month ago.
After some electrical problems I attached this rebuilt manual pump today. Before I start it could you nice folks of maritime knowledge tell me if this is correct ? And is there anything else I should know moving forward here at Hauser lake in north Idaho. I appreciate you all tremendously!

 

[alldodge]

Unable to really see the hose routing but will have a look at my 3 motors to see if one of them resembles your connections

 

[Bp4422]

Unable to really see the hose routing but will have a look at my 3 motors to see if one of them resembles your connections

O

Unable to really see the hose routing but will have a look at my 3 motors to see if one of them resembles your connections

Bottom left is from fuel tank
Top right to carbs

 

[Bp4422]

Bottom left is from fuel tank
Top right to carbs

 

[roscoe]

top left needs that clamp put on

is that hose long enough?

 

[Bp4422]

top left needs that clamp put on

is that hose long enough?

yes I just didn't clamp it yet in case it needed to be put on different port...am I good to go after securing? thanks very much for your time....

 

[alldodge]

Talk about timing. I just remembered to go to the shop and take pics and just returned with them

My 140 has just the single hose going to the carbs
1st Pic 140HP
2nd Pic 120HP
3rd Pic 125HP