Bottom end soot

Portd2

Recruit
Joined
Jul 2, 2022
Messages
4
Bottom end was removed to check water pump from a over heat alarm
now I have exhaust soot showing My boat is docked Will it cause more issues to keep running it
 

Attachments

  • FEF1AD6F-671D-4F1C-B6EF-F6E95CA9D228.jpeg
    FEF1AD6F-671D-4F1C-B6EF-F6E95CA9D228.jpeg
    700.2 KB · Views: 11

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,082
Soot getting to the outside like that is a leaking water/exhaust tube seal. You must have knocked it loose when you removed the lower unit.

You can run it, put the leak will get worst and make a mess (oil and grime) of your lower unit.
 
Last edited:

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
27,856
OK, looks to be a johnnyrude. Check the part diagram for that motor at crowleymarine or other site and see if it has a seal where the exhaust housing contacts the gearcase. It is easy for it to move out of position.

Part #21

BTW - the gearcase to midsection joint is usually made up of slots to allow water and exhaust to escape, if it builds up.
 
Top