I have a garmin 431s gps/sounder to install and am looking for recommendations on the best place to install the transducer. I want to keep it as clean as possible. Can I mount the transducer to just to the right of the out-drive or do I have to go further and outside of the out-drive indentation on the hull?
Suggestions on where the cable is to be positioned (under the swim deck or?) would be greatly appreciated.
I would entertain setting up a shoot through the hull install if I knew if the bottom next to the motor was just 5/8 fiberglass with no dead space or fillers if anyone knows that answer.
Drilling a few screw holes is not a scary thing for me, but I want it in the right place the first time.
Thanks in advance!
Andy
Suggestions on where the cable is to be positioned (under the swim deck or?) would be greatly appreciated.
I would entertain setting up a shoot through the hull install if I knew if the bottom next to the motor was just 5/8 fiberglass with no dead space or fillers if anyone knows that answer.
Drilling a few screw holes is not a scary thing for me, but I want it in the right place the first time.
Thanks in advance!
Andy