1997 Johnson 9.9hp 4 stroke wiring diagram???????

[JOEjones31989]

hello iboat members, been a few years since ive posted in here, but i recently bought a new boat to me, 1997 lund tyee magnum gran sport 19.5'..... it has a johnson 150hp 2 stroke and a 97 johnson 9.9hp 4 stroke on it... i got the 2 stroke running with no issues, but i cannot get the kicker motor to run, its not getting spark. ive looked everyone i can think of trying to find a wiring schematic for this motor with no luck, im hoping someone can help me out with a diagram so i can actually trouble shoot the wiring. the exact model number is L10FRELEUA from what ive been told on it the 9.9 and 150 was special edition motors for lund boats. but only difference was the coloring to match the boats. but any help would be highly appreciated thanks in advance for your time.

 

[flyingscott]

If this is a manual start motor is the lanyard on it?

 

[racerone]

FRE----Might indicate 4 stroke electric start.

 

[flyingscott]

Ok is.the lanyard on it?

 

[jakedaawg]

I'll pull the manual in the morning and post a pic.

 

[JOEjones31989]

Flyingscott it is electric start, the lanyard on the motor itself got disconnected by previous owner, lanyard on key is connected, I've replaced the ignition solenoid, while I was in the motor replacing all the feul lines, and impeller. I'm getting power to the solenoid when the motor is turning over. But from there I'm not getting power to anything else using a light tester. But without a wiring schematic I don't know what 90% of the wires are, and there's like 15+ wires running around in the motor all near the solenoid.

 

[racerone]

This motor has an optical ignition system.------Many expensive parts, many parts listed as NLA.-----Have 3 of them for parts / repair.-----Some dealers do not like this design of Johnson / Evinrude.

 

[JOEjones31989]

Yes, I've noticed it's got some expensive and obsolete parts, the motor only has like 8 hours on it, wasn't used very much, so hoping it's something simple once Im able to get a schematic and troubleshoot it.

 

[JOEjones31989]

jakedaawg, was you by any chance able to get a picture of the wiring diagram?

 

[JOEjones31989]

Well after much research without finding the wires diagram I ordered a Johnson service manual, here is the wiring diagram for anyone else who may need it.