Search results

  1. C

    Volvo 3.0 GS Runs, stops

    I have a Volvo 140hp 3.0GS with the SX drive. Recently the engine starts up fine, runs for about 15min and stops. I did an ignition tuneup which didn't fix the problem. I also changed the fuel filter, same results. I'm thinking when the coil starts to get hot and cuts out. Anyone have...
  2. C

    Volvo 3.0 SX Cutting out

    I've been running my boat every weekend since April with no problems. Yesterday after returning from a ride engine just cut out as we idled back into the dock. Never so it coming. Cleaned up the arrestor, was pretyy dirty. 15 minutes sitting boat started back up. When for another ride, 10...
  3. C

    Canvas SnapTite Fasteners

    Three of my riveted snaptite fasteners broke off from the fiberglass on my boat. The rivets actaully snapped off. I bought some screw in fasteners. What is the best way to put these in, w/o chipping the fiberglass? I need to somehow get the broken rivet stud out as well. Any ideas?<br />Thanks
  4. C

    MinnKota Transom Mount

    Has anyone ever mounted a electric trolling motor to a "swim platform" on the stern of an I/O boat? There are brackets out there, boat I was thinking of bending a piece of SS and attaching it to marine grade wood as the mount. Any other ideas out there?<br />Thanks
  5. C

    Volve SX Prop

    I took the prop of my outdrive last fall. Is there anything special I should do when I reinstall it? Do you need to apply grease or anything? One other item, I am going to have a tuneup done on the engine (4 cyl), and have them pull the drive and inspect. What would be a resonable price for...
  6. C

    Floor Replacement Help

    I am replacing the floor in my 14' Smokercraft. How do I cut the "arc" for the bow section? The stern is obviously easier. Can I somehow make a template? Struggling with this.<br /><br />Thanks for your help.
  7. C

    Volvo 3.0 SX Maint.

    Last spring I purchased a 95 Dynasty BR, with the Volvo 3.0SX drive. Other then having to replace the starter I didn't have any problems with the motor. I had it winterized by the local marina. What should I have done in the spring? I have never owned an I/O before. I know the oil should be...
Top