Search results

  1. L

    Bilge Pumps Not Working

    Quick question - If I fitted a 2nd bilge pump could I Tee the output from both pumps together so still just have the 1 outlet hole in the side of the boat? Or would that mean that if only one pump was pumping it would backflow the other pump so just circulate water around the bilge instead of...
  2. L

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    The old stat is 160F. I can't check the new stat now it's fitted, I seem to remember it being stamped 70C (which is 158F) or a little cooler like maybe 65C (which is 149F). The designs are almost identical but the old stat has a small triangular shaped cutout at the edge of the middle part...
  3. L

    Trailer tongue bracing? Help!

    I'd probably weld it myself or (like @Scott Danforth said) hire a mobile welder. Would expect welding to be easier than trying to temporarily strengthen it by e.g. drilling holes through it and bolting more steel to it. But if welding isn't your thing would you also be out of your...
  4. L

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Been a while since I last posted here but I've been using the boat and it's still running well. Planned on using it on the sea or lakes but the weather hasn't been great so, so far, I've still only used it on a local river. Still had the same problem with the engine not staying hot enough...
  5. L

    Need help

    Years ago I did some work for a UK firm called Powergen, I did similar for them (helped set up a new QC and trace-ability system etc), mostly coal and gas fired stations but nukes too. Also done some NDT myself, mostly magnetic/die-pen and ultrasonic but some Xray bombing.
  6. L

    Need help

    Always remember to zip up your pants when working on nukes, cher'knob'll fall out. Whadya know, it disintegrated
  7. L

    4hp johnson slower than expected

    As a kid I had an 8ft inflatable (with wooden transom) and 3.5 Suzuki, dad made up a stiff wooden floor for it, it would plane with us both in it.
  8. L

    Confused? Voltage Regulator vs Rectifier; Tach & Charging

    Don't be in such a rush to leave Popeye, when I first joined I started a couple of threads about my (same) boat, moderators gave me a bit of a scolding and merged my threads, but the same moderators (also users of the forum) went on to help answer some of my questions. Nothing yoy wrote was...
  9. L

    95 502 needs help

    It'll indicate actual pressure regardless of where it's fitted in the feed to injectors. Pressure will be limited by the reg or pump, most likely the reg. If the pump can only pump to 30psi you won't get higher than 30psi, if the reg is set to 30psi you won't get higher than 30psi.
  10. L

    New Winner!

    My dad had a Winner Viscount in the early 80's, I thought they were made in Wales?
  11. L

    O2 Sensor codes . . .

    Those 2 error code descriptions combined often point to the probe's heater circuit being shorted to its signal output, a problem with the probe itself or its wiring, in which case changing the probe (or fixing the wiring issue) is the fix. Good idea to swap probe positions to see if the error...
  12. L

    Math problem

    Been said you'd need 15.36oz in a 6 gallon tank, 2.56oz in a 1 gallon tank. So if you already had a gallon of pre-mixed in the tank it will have contained 2.56oz oil. You added 16oz of oil, so now your 1 gallon contains close to 18.6oz. If you add an extra 5 gallons of fuel you'll have 18.6oz...
  13. L

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Yes I'd bet most people on the planet know about Holley carbs lol, I don't know much about specific features though. I was meaning to take another look at the Holley website if/when I got around to rebuilding this carb, I'll look sooner now, thanks.
  14. L

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Thanks @Horigan, I appreciate you trying to help but as @Lou C says my fuelling setup is the Holley 2bbl. I haven't had the carb apart and I left it in the boat all winter when I had the engine removed. After rebuilding the engine all I did to clean the carb was put some fuel in it and...
  15. L

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Thanks Lou, Yes it is the Prestolite with electronic 'points' (not mechanical points). I haven't lubricated the weights yet, how is that done? It didn't seem like a misfire, seemed more like the mixture gradually got leaner. But when back on the jetty near the slipway I changed the dizzy cap...
  16. L

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Used the boat on the river for another couple of days and a total of around 70 miles again, this time we went further up the river where there are fewer boats and fishermen to moan about breaking the speed limit. Maintained 30mph at around 3000rpm for 20 minutes no problem but when I opened her...
  17. L

    Process for changing boat trailers?

    Thanks, I have copied and pasted your answer to my friend. Come to think of it I've read similar before. My friend and I didn't know if this would cause a lot of strain on the transom or other parts of the boat. Didn't want to punch a hole through the hull!
  18. L

    Process for changing boat trailers?

    Slightly off topic but probably not worth starting a new thread about... My friend has a Bayliner bowrider with 4.3 Mercruiser, he wants to lower the rollers on the trailer to make the boat sit lower on the trailer to make it easier to launch. It can all be modified using his existing rollers...
  19. L

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Thanks, I think I understand how the system works but wasn't sure if the water flowed up or down through the wide diameter pipe to the circulation pump. I was thinking was there will always be a lot of water recirculating even when the stat is closed. During time the stat is closed any rust...
  20. L

    Building a '93 Caravelle 1750 Classic Bowrider

    Well done @Reserector_ , you earned your name! Great thread.
Top