Search results

  1. Z

    OVERHAUL PROBLEM

    Hi I overhauled my 30hp- 2 stroke. The block was machine for oversize pistons. The head was milled just to clean it. Got it all back together. When I pull the rope if it hits it stops I asked others they said I need an electric starter. I doubled the oil mixture being new rings piston and...
  2. Z

    Nissan ns30a3 prop

    I have a nissan 30hp. Do other makes " Mariner, Suzuki etc" use the same? Reason I ask, there's i a place where I can get used parts cheap.If I could cross reference them I'd have it made. I need a SS prop bad.
  3. Z

    Motor dies when put in gear

    I have a 92 nissan 2 stroke 30hp. It has a new carb & plugs. It runs very strong and is easy to crank. When I put it in gear the motor quits even after running a half hour. If I set the choke tween 1/2 and 2/3rds it will sometimes go but its tricky. I adjusted the carb,idle rpms and timing...
  4. Z

    Nissan 30hp 2 stroke running poor

    This motor was running strong this morning. I ran it low throttle for 15 minutes. when I throttled up to run the motor was weak. I thought the plugs were fouled from running slow. My friend suggested I always put Seafoam in the gas. Could that help?
  5. Z

    M50d Model Identification Help

    I have a tohatsu m50d. How can I tell what year it was made?
  6. Z

    Nissan Remote "How it works?"

    I have a remote that came with my boat which had a 70hp tohatsu. I'm considering using it with the 30hp nissan. How does the throttle work? I got it to shift into foreward nuetral and reverse. What is the flat metal lever beside the shifter? no choke?
  7. Z

    Propeller Shaft Seal

    I have a NS30A3 30hp. Oil is leaking from the prop. Can I get a seal for it from a local parts jobber like napa or autozone? Thanks Ziton
  8. Z

    delete

    Found it in the search
  9. Z

    TED WILLIAMS 7.5 HP

    HI I'm new to this forum. Anyone know SEARS TED WILLIAMS 7.5 HP. OUTBOARD MOTOR - 21758881 . The motor is in mint condition. The carb was removed and disassembled. I got the motor intact with the carb removed and apart. I put it back together. I don't know if everything is there or not. Anyway...
  10. Z

    IDENTIFYING OLD EVINRUDE

    I have an old evinrude 3 hp I need parts for the serial number is 3012-01881. I can't find the model number. thanks Don
Top